Can a Motor Driven Load be used with an Easy UPS / Back-UPS?
No, an Easy-UPS or Back-UPS use a step-approximated sine waveform on the output of the UPS to the load. The Easy-UPS and Back-UPS models are intened to be used with computers and peripheral devices. These models are not intended to be used with motor driven equipment. If a motor driven load has been attached to the UPS, it may cause premature damage to the UPS.
Please refer to the below extracted from the user manual under troubleshooting section:
Please refer to the below extracted from the user manual under troubleshooting section:
Publikované pre: Schneider Electric Slovakia
Potrebujete pomoc?
Výber produktov
Rýchlo a jednoducho nájdite tie správne produkty a príslušenstvo pre vaše aplikácie.
Získať ponuku
Kontaktujte nás online a náš odborník sa s vami spojí.
Kde nakúpiť?
Jednoducho nájdite najbližšieho distribútora produktov Schneider Electric vo vašom okolí.
Centrum podpory
Nájdite zdroje podpory pre všetky vaše potreby na jednom mieste.