{}

我們的品牌

Impact-Company-Logo-English Black-01-177x54

歡迎造訪施耐德電機全球網站

歡迎訪問我們的網站
搜尋常見問題
The Main light or LED backlight on an Ulti switch / dimmer does not turn on.
Possible causes are
1.   Wires are not properly secured or connected in the terminals. Make sure the wires are secured, screws are fastened and the Live or Load wires have been connected to the correct terminals.
2.   The Consumer Unit MCB in the property is OFF or has been tripped. Switch on the MCB. If a breaker continually trips, contact a registered electrician to find out the cause of the problem

3    Temporary disorder. Switch off the MCB in your consumer unit and then on again to reset the switch

Ulti switches / dimmers are now discontinued.

施耐德電機Taiwan

探索更多
系列:
可能有幫助的文章
探索更多
系列: