How to manually delete I/O mapping after deactivating the IEC61850 Server function of a BMENOP0300 ?
If the Server function on the IEC61850 Configurator tool was previously enabled, the related mapped variables are automatically created on EcoStruxure Control Expert Device DDT.
To disable this Server function and delete the related variables on ECE:
- Delete first Server variables on the IEC61850 Configurator tool by opening the IEC61850 Configurator tool:
2- Click on "I/O Mapping ":
3- Select "Server" tab and click on “remove all”, then “yes”:
4- Go back to the «General” tab an disable the Server function:
5- Close the IEC61850 configurator: It will ask to save > click on 'yes':
6- Click on “Update application”, then make a "rebuild all" of the program:
The previous "Server" variable will be automatically deleted on the ECE Device DDT side.
Опубліковано для: Schneider Electric Україна
Потрібна допомога?
Почніть тут!
Знайдіть відповіді зараз. Шукайте рішення самостійно або зверніться до нашого експерта.
Звернутися до служби підтримки
Якщо вам потрібна допомога, додаткова інформація чи технічна підтримка або ви хочете подати скаргу, зв’яжіться з нашою командою з обслуговування клієнтів.
Де придбати?
Зручний пошук найближчого дистриб’ютора, магазина або спеціалізованого партнера Schneider Electric у вашому регіоні.
Переглянути відповіді на поширені запитання
Отримайте необхідну інформацію, переглянувши відповіді на поширені запитання за відповідними темами.