How to open the hardware configuration on a HMI programmed with EOTE?
Issue
It is not clear how to open the hardware configuration on a physical HMI programmed with EcoStruxture Operator Terminal Expert
Product Line
EcoStruxture Operator Terminal Expert
HMI running EOTE, EOTE Runtime
Resolution
There are 2 options to try and open the hardware configuration on an HMI running EOTE
[Option 1]
Display with Touch Gestures
Within 0.5 seconds, touch the top-right then bottom-left corners, or the top-left and bottom-right corners (within a 40 pixel area) of the screen
This option can be enabled / disabled from the settings as follows.
1/ In the Project Explorer window, from [System Architecture] click [Target01].
2/ In the Properties window, go to [Function] tab ➞ [Options] tab ➞ [Preference].
[Option 2]
Display with Hardware Configuration object on a screen
Note: The size of the object is the size of the Hardware Configuration screen. It is not a button.
If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Support | Schneider Electric Global (se.com)
Опубліковано для: Schneider Electric Україна
Потрібна допомога?
Почніть тут!
Знайдіть відповіді зараз. Шукайте рішення самостійно або зверніться до нашого експерта.
Звернутися до служби підтримки
Якщо вам потрібна допомога, додаткова інформація чи технічна підтримка або ви хочете подати скаргу, зв’яжіться з нашою командою з обслуговування клієнтів.
Де придбати?
Зручний пошук найближчого дистриб’ютора, магазина або спеціалізованого партнера Schneider Electric у вашому регіоні.
Переглянути відповіді на поширені запитання
Отримайте необхідну інформацію, переглянувши відповіді на поширені запитання за відповідними темами.