Do we offer Combination Motor Starters (e.g. GV2DM202) in the UK?

In the UK we do not offer pre-assembled combination starters, but we do offer the individual parts to make them up. The assembly is a very short and simple process.

Each starter is made up of  a GV2 manual motor starter and a contactor (LC1D or LC1K) plus an adaptor to join the two together. The section of the catalogue for combination starters lists the part numbers of the individual parts required.

You can find these in chapter A2 of the motor control catalogue. Either go to www.se.com/uk, type 'Tesys' into the search bar and download the catalogue, or use the link below for the latest version at time of writing.

https://download.schneider-electric.com/files?p_Doc_Ref=MKTED210011EN&p_enDocType=Catalog

Example
D.O.L Reversing starter GV2DM202**

This is made from the following:

• Motor Circuit Breaker GV2ME02
• Contactor LC2D09**
• Combination Block GV2AF3

Note
** refers to the coil voltage code eg BD for 24Vdc

Released for: Schneider Electric UK