How can I setup Vijeo Citect to communicate to a controller via Modbus Plus using the TSXCUSBMBP adapter?

How can we help you today?

This documents explains the steps involved in configuring Vijeo Citect to communicate to a controller via Modbus Plus protocol.

This procedure uses the Vijeo Citect MBPLUS Driver.

1) Configure the I/O Server, Boards, Ports and I/O Devices as shown below:

2) Testing with a Quantum / Unity Controller which requires to select the MBPLUS20 Protocol.

Attachments

3) Install the latest version of the MBPLUS driver. Note: you will need to install the latest version of the Modbus Plus MBx driver.

Released for:Schneider Electric UK

Published on:3/22/2013Last Modified on:3/2/2023

Range:

AVEVA™ Plant SCADA

Range:

AVEVA™ Plant SCADA