For remote sites there is a way of connecting remotely to a Micrologic unit to change the Power Flow Sign.
On page 118 of the following user guide is talks about Power Flow Sign and has a command code of 47240. This configures the power flow sign.
https://www.se.com/ww/en/download/document/DOCA0091EN/
Page 138 of the same guide explains how to do this configuration.
On page 118 of the following user guide is talks about Power Flow Sign and has a command code of 47240. This configures the power flow sign.
https://www.se.com/ww/en/download/document/DOCA0091EN/
Page 138 of the same guide explains how to do this configuration.
Released for:Schneider Electric UK
