Note: The ASiABL Range of Power supplies are no longer supplied by Schneider Electric, we no longer manufacture any ASi Power supplies. This FAQ is for information only. However, a German company Bihl and Wiedemann who specialise in ASi have cross-reference tables available for our power supplies. See link below:

Schneider Electric - Bihl+Wiedemann GmbH (bihl-wiedemann.de)


If the fault is an Overload or Short Circuit fault then the fault light will go off when the fault has cleared. This applies to the following ranges:

• ASIABLB300*
• ASIABLD300*
• ASIABLM3024
  

If the fault indication appears on the ASIABLD300* power supplies (ASIABLD3002 & ASIABLD3004), it can be reset in two ways:

• Press the Reset Button on the front of the PSU
• Send a reset command by closing the contact on the unit, terminals +/-

Note : All faults should be cleared before resetting the unit.
Attached is an instruction sheet with the same information in a pictorial format

Released for:Schneider Electric UK