How is the DC injection braking setup on the ATV212 drives?
DC injection bracking can be configured on the ATV212 series drives via the following three parameters found under the extended function menu (F---)
F250 = DC braking starting frequency, set to a value > 0
F251 = DC braking current level
F252 = DC braking time
Caution: Prolonged periods of DC injection can damage the motor by generating excess heat.
If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:
If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us at drive.products.support@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Released for: Schneider Electric USA
