Search FAQs
[OID]Reset=1 does not reset OIDs when tags are in an include project
Goals and Symptoms
Summary: |
It was found that setting [OID]Reset=1 in the Citect ini file, did not reset the OIDs when the variable tags are located in an include project. I've used Open Office to modify my variable.dbf. This behaviour also exists when using the ProjectDBFAddIn macro with the 'Save Only" option. Using the "Save and Reindex" option however allowed the OIDs to be reset I'm able to reset without any problems if the variable tags are located in the main project after I've modified the variable.dbf using - Open Office - ProjectDBFAddIn macro with the 'Save Only" option |
Facts and Changes
|
Causes and Fixes
Solution: |
- Have the variable tags in the main project if you are using - Open Office - Use the ProjectDBFAddIn macro with the "Save and Reindex" option |
Ctiect is aware of this problem and we are currently investigating this issue
Original Article#: Q5386
Applies To: CitectSCADA, VijeoCitect
Transferred to Schneider PREP: Darren Milligan, April 2009
Created:Thursday, 9 April 2009
Last Modified:Thursday, 9 April 2009
Suggested By: Michel Latumaelissa
Internal PMO/PMC
All content © 1992-2009 Schneider Electric
Released for:Schneider Electric USA
Explore more
Range:
Explore more
Range: