Issue:
Wiring process for LC1D Contactor with spring terminals
Product line:
Tesys D contactors

Environment:
Applies to contactors with spring terminals

Cause:
Customer wants to know how to wire a D-line contactor with spring terminals

Resolution:
Check attached picture and follow instructions below.

You need to use a flat head screwdriver to do the wiring.

1- Insert the screwdriver in the red marked arrows/rectangles applying some pressure to compress the spring
2- Insert the wire in the hole marked in blue
3- Remove the screwdriver to hold the wire in place.
4- Repeat steps 1, 2 and 3 for the remaining terminals

Released for: Schneider Electric USA