Issue:
How to install, replace, and remove the Everlink lugs in a Powerpact B-frame breaker
Product Line:
Powerpact Molded Case Circuit Breakers
Resolution:
First, take off the green terminal cover by sliding something flat into the notch and popping it off. Then, slide the flat object under each tab of the lugs on the back of the breaker and push up. Once loosened, the lug cover should come off, and the lugs would then be able to slide right out of the breaker. They can then be replaced, and the lug cover can be pushed back on until it clicks into place, and then do the same with the green terminal cover. For further instruction, see the video below:
How to install, replace, and remove the Everlink lugs in a Powerpact B-frame breaker
Product Line:
Powerpact Molded Case Circuit Breakers
Resolution:
First, take off the green terminal cover by sliding something flat into the notch and popping it off. Then, slide the flat object under each tab of the lugs on the back of the breaker and push up. Once loosened, the lug cover should come off, and the lugs would then be able to slide right out of the breaker. They can then be replaced, and the lug cover can be pushed back on until it clicks into place, and then do the same with the green terminal cover. For further instruction, see the video below:
Released for: Schneider Electric USA
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.
