Video: How to Configure a 4-20 mA Signal Loss Fallback Function on an ATV212 Drive
Resolution:
To program this function:
- Press Modem when you see AUF, press the down arrow >> F--- and enter.
- Go to F644 and F649.
- F644 defines the action taken when a loss of 4-20mA is detected.
- F649 only applies if the F644 parameter is programmed to fall back to a speed (2).
If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:
Frequently Asked Questions - Schneider Electric (se.com)
If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us at drive.products.support@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Support | Schneider Electric Global (se.com)
Released for: Schneider Electric USA
