Product Line
ION9000 Series
Environment
Web Server
Front Panel
Resolution
The username and password are defined by the meter’s security configuration; if standard security is enabled, the password is the same as the front display password.
See the ION9000 series meter factory default settings:
Note: To help increase the security of your meter’s configuration and data, configure the meter’s username and passwords to be different from the default values.
For more information about the ION9000 series meter, please refer to the User Guide that can be downloaded at the link below:
ION9000 User Guide
ION9000 Series
Environment
Web Server
Front Panel
Resolution
The username and password are defined by the meter’s security configuration; if standard security is enabled, the password is the same as the front display password.
See the ION9000 series meter factory default settings:
| Parameter | Default value |
| Standard and advanced security display password | 0 |
| Standard security mode username | 9000 |
| Standard security web and ION Setup password | 0 |
| Advanced security mode username | User1, User2, User3, etc. |
| IP Address | 169.254.0.10 |
| Subnet Mask | 255.255.0.0 |
| Gateway | 0.0.0.0 |
| RS-485 | COM1 Unit ID: 100 COM2 Unit ID: 103 |
| Language | English |
Note: To help increase the security of your meter’s configuration and data, configure the meter’s username and passwords to be different from the default values.
For more information about the ION9000 series meter, please refer to the User Guide that can be downloaded at the link below:
ION9000 User Guide
Released for:Schneider Electric USA
