Can a 200A subfeed breaker be field installed in an NQOD442L400 panelboard?
Issue:
Breaker installation in old panel
Product Line:
Panelboards
Environment:
UL 67, UL 50, CSA C22.2 No.'s 20-M1989 & 94-M91, NEMA PB1, NFPA 70 Art. 408, Federal Specification W-P-115C Type 1 Class 1 , 2003 IBC, NFPA 5000, ASCE/SE17
Cause:
It may be desirable to add a large ampere branch device to an existing panelboard.
Resolution:
No, a 200A sub feed breaker cannot be field installed in this panelboard. NOTE: NQOD panelboards are obsolete, superseded by NQ.
Breaker installation in old panel
Product Line:
Panelboards
Environment:
UL 67, UL 50, CSA C22.2 No.'s 20-M1989 & 94-M91, NEMA PB1, NFPA 70 Art. 408, Federal Specification W-P-115C Type 1 Class 1 , 2003 IBC, NFPA 5000, ASCE/SE17
Cause:
It may be desirable to add a large ampere branch device to an existing panelboard.
Resolution:
No, a 200A sub feed breaker cannot be field installed in this panelboard. NOTE: NQOD panelboards are obsolete, superseded by NQ.
Released for: Schneider Electric USA
