The suggested replacement for the Harmony Hub ZBRN1 is the Panel Server line product references:

PAS400

PAS600

PAS800

PAS gateways are compatible with ZBRT* transmitters from frimware version 002.002.000. The latest version is published on the website and can be downloaded by customers.

Note: Hardware version should be taken into account as well (HW V1 or HW V2 depends on the gateway type).

User guide: EcoStruxure Panel Server User Guide

From firmware version v002.005.000 onward, all EcoStruxure Panel Server (PAS) models include a default Username: SecurityAdmin and Password: AAAAAAAA. These credentials are required during the initial installation or after a factory reset, but they can be changed once the setup is complete. Refer to the User Guide for additional details.

In general, the PAS requires the default username and password when accessing the device locally. However, when configuring Data Publication settings or managing Cybersecurity features, the default credentials must be changed to ensure proper security.

Figure 1: Initial commissioning

This can initially be completed using one of the following methods:

• EcoStruxure Power Commission (EPC) software. Download here.

• The EcoStruxure Panel Server (PAS) homepage via its embedded web interface.

The EcoStruxure Panel Server documentation can be found in the following links:

• FAQ000239552
• HERE

If you are unable to log into the webpage due to a lost or forgotten password, refer to the User Guide under “Resetting to Factory Settings” for instructions.

As of firmware 001.009, the PAS800 Panel Server does not support multiple user accounts. It is managed by a single user. See the below guide for any updates based on the firmware release version. Firmware Release Version Notes

Title: Panel Server compatibility with Telemecanique switches

Issue: Are these Telemecanique XCMW wireless battery-less switches supported by the PAS devices?

Product Line:  ZBRN1 ; Panel Server

Environment: Panel Server

Resolution:

Telemecanique products are not supported by Panel Server.

The EcoStruxure Panel Server User Guide can be found in the Schneider Electric website here: https://www.se.com/us/en/download/document/DOCA0172EN/

The EcoStruxure Energy System Cloud is a cost-effective, reliable, and streamlined solution for energy monitoring and management. It reduces hardware dependencies by replacing traditional, large-scale, on-premises servers with Schneider Electric’s cloud-based infrastructure, enabling efficient data handling and system control.

The system architecture is organized into three core components:

• Metering – Schneider Electric-compatible power monitoring and control devices
• Gateway – EcoStruxure Panel Server (EPaS) and/or EcoStruxure Site Server (ESS)
• Cloud – EcoStruxure Energy Hub (EEH)

Each component is supported by dedicated documentation detailing configuration, integration, and operational guidelines.

1. Schneider Electric-compatible Power monitoring and Control devices

• See the Schneider Electric Digest 179: Digest 179 Complete Catalog

2. Gateways

• EcoStruxure Panel Server [EPaS]

• Access point for Schneider Electric's full technical documentation:

DOCUMENTS

• EcoStruxure Site Server [ESS]

• Access point for Schneider Electric's full technical documentation:

DOCUMENTS

• USER GUIDE
• TECHNICAL DATASHEET

3. Cloud (EcoStruxure Energy Hub [EEH]

Access point for Schneider Electric's full technical documentation:

DOCUMENTS

• EEH HELP and ALARMS
• TECHNICAL DATASHEET
• IT GUIDE and SECURITY GUIDE