RapidSource Delivers Faster
Whether you’re ordering Square D™ Switchboards, Integrated Equipment or Low Voltage Motor Control Centers, the RapidSource™ program expedites your delivery and reduces lead time, allowing you to meet tighter work schedules.
An expanded selection of equipment ratings and options are available, ensuring you can always install quality Square D products at your job sites.
Plus, factory-approved construction drawings are available immediately, so you can keep your team working on pouring pads and installing conduit right away, keeping your crew productive.
Learn about the products and options available with RapidSource expedited delivery.
Fast
Shorter equipment lead times and faster project turnaround
Easy
Estimating and bidding is easier and less of a hassle
Flexible
Keep crews productive with on demand, factory-approved for-construction drawings
Square D QED 2 Switchboards
with RapidSource
Use RapidSource to get faster delivery on high quality Square D QED 2 switchboards. Standard designs feature the most frequently requested ratings and options and offer optimized lead times as short as 4 weeks. See ratings and options below.
Download the
-
Ratings & Options
- Ratings:
up to 4000 A and 100 kAIC with Bus Bar Plating
- Design voltage:
up to 600 Vac or 250 Vdc
- Available Enclosures:
Indoor NEMA 1 or Outdoor NEMA 3R
- Bussing options:
Aluminum with tin plating or Copper with silver plating
- Single or double row I-Line™ distribution configuration
- Powerlogic™ power meters
PM8000 series, ION7550/ION7650 series, ION 9000 series
- Internally mounted Surgelogic® surge protective devices
- Group-mounted and Individually mounted devices
with metering down to 15 A and Energy Reduction Maintenance Switch (ERMS)
- Ratings:
-
Ratings & Options
- General:
Panels over transformer configurations
Pre-wired and factory installed power cables
Top and bottom conduit entry/exit space available
Freestanding construction
Front and rear aligned sections
NEMA 1 and Seismic Qualified IBC/ASCE7
- NF Panel:
Source type: single main or main lug
UL® Service Entrance Label
Max available fault current (RMS): 14kA through 65kA
System protection: fully or series rated
System ampacity: 175 A through 400 A
Circuit counts of 18, 30, 42, 54
Bus metal and plating: AL Tin / CU Tin or Silver
Solid neutral: AL or CU, 100% Rated
Incoming lug types: AL mechanical lug
Device lock options
- NQ Panel:
Source type: single main or main lug
Max available fault current (RMS): 10kA through 22kA
System protection: fully or series rated
System ampacity: 50 A through 400 A
Circuit counts of 18, 30, 42, 54, 72, 84
Bus metal and plating: AL Tin / CU Tin, Silver
Solid neutral: AL or CU, 100% Rated
Incoming lug types: AL mechanical lug
Device lock options
- Transformer:
3-phase
Type: DOE 2016 EX
Primary voltage: 480V
Secondary voltage: 208Y/120V
Rating: 15kVA, 30kVA, 45kVA, 75kVA and 12.5KVA
Winding material: AL and CU
Temperature rise: 80C, 115C and 150C
Primary or secondary transformer disconnects
- General:
Square D Low Voltage Model 6 Motor Control Centers
with RapidSource
Use RapidSource to design the best Low Voltage (LV) Model 6 MCC solution to meet your customer needs and process requirements. RapidSource is specifically designed to address challenges faced by System Integrators, Panel Builders, and OEMs. Our program provides a simplified ordering process of complete LV Model 6 MCC lineups that deliver most options within 4 weeks. See ratings and options below.
Download the
-
Ratings & Options
- Available Enclosures:
NEMA Type 1, Type 1A (gaskets), Type 12, Type 3R
- Bussing Options:
Voltage Rating: 208 – 600V; 3-phase; 3 or 4 wire
Horizontal Bus Rating: 600 to 2500 A
Vertical Bus Rating: 300 to 600 A
Bus Withstand Rating 42kA to 100kA
- Monitoring, Surge Protective Devices & Incoming Connections:
Power Monitoring
Surge Protection: 120kA/phase to 240kA/phase
Incoming Connections: UL Service Entry Label, Cable or existing MCC section or Left or Right | Top or Bottom
Optional Seismic or Closed Door Racking
- Mains and Feeders:
Circuit breakers: electric trip and communications
Feeder circuit breakers: closed door racking, thermomagnetic or electric trip, and communications
Fusible switches
Main lug only
- Starters:
Full voltage and reduced voltage auto-transformer starters
Reversing, 2-speed options
Smart starter options: TeSys U or TeSys T
High density 6” starters
Circuit breaker or fusible switch disconnects
Extra mounting height
- AC Drives and Soft Starters:
Altivar 630 and 930
18 Pulse Drive
ATS22: IEC Contactors
ATS48: IEC or NEMA Contactors
- Automation:
Ethernet Com’X 510 Energy Server
- Available Enclosures:
