Is it possible to control BRH motor with 16-trace hyperface encoder by LXM15M?

Q: Is it possible to control BRH motor with 16-trace hyperface encoder by LXM15M?

Goals and Symptoms Is it possible to control BRH motor with 16-trace hyperface encoder by LXM15M? Causes and Fixes Now I finished my tests with the following result: - In the BRH with a 16 trace Hiperface is a SEK52 inside and with this encoder it is not possible to use the BRH motor in combination with a LXM15. - But a combination BRH with a 128 trace Hiperface inside (SKS36 encoder) and a LXM15 is possible. Legacy KB System (APS) Data: RESL201595 V1.0, Originally authored by HeKu on 03/09/2010, Last Edited by HeKu on 03/09/2010 Related ranges: Lexium 15 Đã phát hành cho: Schneider Electric Việt Nam

Question

Accepted Answer

Goals and Symptoms

Is it possible to control BRH motor with 16-trace hyperface encoder by LXM15M?

Causes and Fixes

Now I finished my tests with the following result:

- In the BRH with a 16 trace Hiperface is a SEK52 inside and with this encoder it is not possible to use the BRH motor in combination with a LXM15.

- But a combination BRH with a 128 trace Hiperface inside (SKS36 encoder) and a LXM15 is possible.

Is it possible to control BRH motor with 16-trace hyperface encoder by LXM15M?

Đã phát hành cho: Schneider Electric Việt Nam

Sản phẩm

Hỗ trợ

Công ty

Liên kết nhanh

Đối tác

Phát triển bền vững

Sự kiện

Thông tin chuyên môn
opens new tab