Sepam 20 - why is "CCA630" displayed even though I have connected a CCA634 CT adaptor?

Question

Accepted Answer

For the Sepam 20 range, as of firmware version V11.14 and SFT2841 software version V15.1, the Diagnostics screen will always show that a CCA630 is present.

The display will not show that a CCA634 is present, even if you have connected it correctly.

This is not a problem, and you can use the CCA634 as stated in the User Manual, provided that your Sepam 20 was manufactured after June 2006.

AEDL3

Sepam 20 - why is "CCA630" displayed even though I have connected a CCA634 CT adaptor?

Đã phát hành cho: Schneider Electric Việt Nam

Sản phẩm

Hỗ trợ

Công ty

Liên kết nhanh

Đối tác

Phát triển bền vững

Sự kiện

Thông tin chuyên môn
opens new tab

Sepam 20 - why is "CCA630" displayed even though I have connected a CCA634 CT adaptor?

Đã phát hành cho: Schneider Electric Việt Nam

Sản phẩm

Hỗ trợ

Công ty

Liên kết nhanh

Đối tác:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Phát triển bền vững:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Sự kiện:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Thông tin chuyên môn:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}opens new tab

Đối tác

Phát triển bền vững

Sự kiện

Thông tin chuyên môn
opens new tab