Product Line
ION9000 Meter

Environment
Webpages

Resolution

• You can access the meter’s webpages through the meter’s Ethernet connection using a web browser
• You must have cookies enabled in order to access your meter’s webpages
• You may need to configure your meter’s security settings in order to view  webpages and configure your meter using webpages
• On a hardware-locked meter, you cannot add, delete or modify any webpage files
• If you are connected to your device over Ethernet, changing Ethernet configuration parameters without another method of configuration enabled may cause loss of communications with your device and render it inaccessible
• The ION9000 meter comes with the default webpages that include:

Monitoring

Webpage Menu	Webpage Content
Instantaneous Readings	Basic readings Energy readings Demand readings Voltage readings Power Quality
Trending & Forecasting	Select the target and interval for trending and forecasting and view the results.
Power Quality Summary	Harmonics Chart ITI (CBEMA)-SEMI NEMA Motor Derating Curve EN50160 IEEE 519 Harmonics
Inputs/Outputs	Digital inputs Digital outputs Analog inputs Analog outputs
Waveforms	View waveforms from your meter, using the meter’s COMTRADE files

Control

Webpage Menu	Webpage Contents
Resets	Perform resets, and view when previous resets were performed

Diagnostics

Webpage Menu	Webpage Contents
Statistics	Communications Ethernet Serial port Meter - Basic Meter - Advanced
Phasor diagram	View the phasor diagram and numeric values

Setup

Webpage Menu	Webpage Content
Ethernet	Basic Settings Advanced settings
Serial Port	Basic Settings Advanced settings
SNMP Parameters	Configure your meter’s SNMP parameters.
NTP	Configure your meter’s NTP parameters
SMTP	Configure your meter’s SMTP parameters
Date & Time	Configure your meter’s time and time synchronization
Preferences	Enter your meter’s nameplate information
Metering	Basic Settings Advanced settings
HTTPS	Certificate Management

Maintenance

Webpage Menu	Webpage Content
—	Custom. No default content. By default, the Maintenance menu is empty, and the menu is not displayed until information is added to it.

.
ION9000 default webpages file is located here FA363418.

Đã phát hành cho: Schneider Electric Việt Nam