Cannot run multiple instances of the PLC simulator.
Attempts to run multiple instances of the PLC simulator returns the following error.
The reason the error is returned is due to the default TCP/IP port 502 for the simulator to have been already used. To resolve the issue,
a different TCP/IP port must be used for any additional instance of the PLC simulator.
The following steps can be used to run multiple instances of the PLC Simulator.
- Click on Start\Windows System.
- Select 'Command Prompt.
Change the path to the folder that the PLC simulator is installed. In this example, I have copied the PLC simulator folder to my root C: drive.
Type in the following command for each instance of the simulator.
sim /IP(Ipaddress) /Port(TCP/IP port number)
i.e., C:\PLC_Simulator>sim /IP127.0.0.1 /PORT503
- Start the the Control Expert applications
- Connect to each simulator using the IP address and port number for the applicable instance of the simulator.
i.e., 127.0.0.1:503
Đã phát hành cho: Schneider Electric Việt Nam
Bạn cần trợ giúp?
Công cụ chọn sản phẩm
Nhanh chóng và dễ dàng tìm được sản phẩm và phụ kiện phù hợp cho các ứng dụng của bạn.
Nhận báo giá
Bắt đầu gửi yêu cầu bán hàng trực tuyến và chuyên gia sẽ liên hệ với bạn.
Nơi mua hàng?
Dễ dàng tìm nhà phân phối Schneider Electric gần bạn nhất.
Trung tâm Hỗ trợ
Tìm sự hỗ trợ cho mọi nhu cầu của bạn tại một nơi.