Nhãn hiệu của chúng tôi

Impact-Company-Logo-English Black-01-177x54

Chào mừng bạn đến với Trang web của Schneider Electric

Chào mừng đến với trang web của chúng tôi.
		
Hôm nay chúng tôi có thể giúp gì cho bạn?
Factory reset of M580 CPU with Engineering Link set to "Enforced"

Issue:


Unable to connect to M580 because the password was forgotten and the Engineering Link mode was set to "Enforced".


When Engineering Link is set to Enforced, you are forced to create an application password. Also the only protocols that can now be used to connect are:


HTTPS

HTTPS via USB


when using those protocols, you can no longer use the SHIFT + F2 method to obtain a code that will allow engineering to provide a recovery password if you forget the application password.


Also the method of moving the CPU one slot over to the right does not work in this mode.


We are left with no method of clearing the CPU back to NO CONF mode.


Products:


M580 CPU with firmware 4.20 and up

Control Expert 16.0 and up


Resolution:


There are 2 methods that can allow us to recover the CPU with an "Enforced" engineering link.


Method 1 : This method will require you to know the password for the firmware update.


Using EcoStruxure Automation Device Maintenance, you can downgrade the CPU back to firmware 3.20. Since this version did not support the Engineering link feature, the CPU will reject and erase the application when downgrading.


You will need a special firmware in order to downgrade your 4.20 and up back to 3.20. Please contact your Schneider technical support group to get that firmware. This is required in order to check if your M580 CPU Product version (PV) allows for a downgrade back to 3.20



Method 2 : This will require an M580 SD card (BMXRMS004GPF) and a spare M580 CPU of the same model


In the spare CPU, create an application with no application password. The engineering link mode might have to be set to "Full Access". Make sure to insert the SD card in the CPU before transferring this application in the spare CPU.


Once this is done, power down the spare CPU and retrieve the SD card.


Power down the "locked" CPU and insert the SD card.


Power the CPU back up. The program in the SD card will overwrite the one in the CPU, effectively replacing the application with the "Enforced" option.



Schneider Electric Việt Nam

Tìm hiểu thêm
Phạm vi:
Tìm hiểu thêm
Phạm vi:

Bạn cần trợ giúp?

  • Công cụ chọn sản phẩm

    Nhanh chóng và dễ dàng tìm được sản phẩm và phụ kiện phù hợp cho các ứng dụng của bạn.

  • Nhận báo giá

    Bắt đầu gửi yêu cầu bán hàng trực tuyến và chuyên gia sẽ liên hệ với bạn.

  • Nơi mua hàng?

    Dễ dàng tìm nhà phân phối Schneider Electric gần bạn nhất.

  • Trung tâm Hỗ trợ

    Tìm sự hỗ trợ cho mọi nhu cầu của bạn tại một nơi.

  • Tài liệu về Sản phẩm
  • Tải xuống phần mềm
  • Công cụ chọn Sản phẩm
  • Thay thế và thay đổi sản phẩm
  • Trung tâm Hỗ trợ
  • Tìm Văn phòng của chúng tôi
  • Nhận báo giá
  • Tìm Nhà Phân phối
  • Cơ hội nghề nghiệp
  • Hồ sơ doanh nghiệp
  • Báo cáo hành vi sai trái
  • Khả năng truy cập
  • Phòng tin tức
  • Nhà đầu tư
  • EcoStruxure
  • Tìm việc
  • Blog
  • Chính sách bảo mật
  • Thông báo về Cookie
  • Điều khoản sử dụng
  • Change your cookie settings