How do I connect to the Edge I/O Network Interface Module via USB connection
Issue:
USB connection to the Edge I/O NIM
Product Line:
Edge I/O
Resolution:
The USB Port connection is suitable for short-duration connections for the express purposes of configuration, maintenance, and troubleshooting. It is not intended as a long-standing connection for other purposes. Further, the network interface module may only be connected to a PC.
Note: The communication cable should be connected to the PC first to help minimize the possibility of electrostatic discharge affecting the network interface module
To connect the network interface module to the PC, do the following:
You must configure a virtual Ethernet Link on your USB port, before you can access the network interface module through USB.
To configure a virtual Ethernet Link, configure an Ethernet interface of the USB-RNDIS by following the steps below:
Đã phát hành cho: Schneider Electric Việt Nam
Bạn cần trợ giúp?
Công cụ chọn sản phẩm
Nhanh chóng và dễ dàng tìm được sản phẩm và phụ kiện phù hợp cho các ứng dụng của bạn.
Nhận báo giá
Bắt đầu gửi yêu cầu bán hàng trực tuyến và chuyên gia sẽ liên hệ với bạn.
Nơi mua hàng?
Dễ dàng tìm nhà phân phối Schneider Electric gần bạn nhất.
Trung tâm Hỗ trợ
Tìm sự hỗ trợ cho mọi nhu cầu của bạn tại một nơi.