How do I setup Modbus serial communication between two Ecostruxure Machine Expert controllers using the Read_Var function block?

Q: How do I setup Modbus serial communication between two Ecostruxure Machine Expert controllers using the Read_Var function block?

Issue: How to setup Modbus serial communication between two Ecostruxure Machine Expert controllers using the Read_Var function block Product Line: Ecostruxure Machine Expert Resolution: In this example, the M251 is setup a Modbus Slave and the M262 as Master. Ensure that both devices serial line settings are identical Below is the logic where the blink function is used to execute the read every second. The address table variable of the ADDM block must be used as the address(Addr pin) of the READ_VAR block. Attached is the sample project created in Ecostruxure Machine Expert V2.3 Đã phát hành cho: Schneider Electric Việt Nam

Question

Accepted Answer

Issue:

How to setup Modbus serial communication between two Ecostruxure Machine Expert controllers using the Read_Var function block

Product Line:

Ecostruxure Machine Expert

Resolution:

In this example, the M251 is setup a Modbus Slave and the M262 as Master. Ensure that both devices serial line settings are identical

Below is the logic where the blink function is used to execute the read every second. The address table variable of the ADDM block must be used as the address(Addr pin) of the READ_VAR block. Attached is the sample project created in Ecostruxure Machine Expert V2.3

How do I setup Modbus serial communication between two Ecostruxure Machine Expert controllers using the Read_Var function block?

Đã phát hành cho: Schneider Electric Việt Nam

Sản phẩm

Hỗ trợ

Công ty

Liên kết nhanh

Đối tác

Phát triển bền vững

Sự kiện

Thông tin chuyên môn
opens new tab