Browse FAQs

What are the recommended replacement parts for the ION7650 series meter and PowerLogic Circuit Monitor CM4000T meter?

Published date: 09 June 2020



Issue
The ION7650 series meter and the Circuit Monitor meter CM4000T obsolete.

Product Line
PowerLogic Circuit Monitor CM4000T meter
ION7650 series meter
ION9000(T) series meter

Environment
End of commercialization and recommended replacement

Cause
The ION7650 series meter and the CM4000T meter are obsolete.

Resolution
The ION7650 series meter has a recommended replacement, the ION9000 series meter. They have physical differences, the ION9000 has
two main part numbers METSEION92030 without display and METSEION92040 with remote display, and the ION7650 series had Ethernet Fiber capability,
but the ION9000 series meter does not have yet.  Please click on the following links for documentation; ION7650 meter FA347957, and ION9000 meter FA358428.

Whereas the Circuit Monitor CM4000T with Speed Transient detection was replaced with the ION9000T where “T” stands for transient.
The ION9000T recognized as the high accuracy meter with High-Speed Transient Capture (HSTC) from 10 MHz sampling with up to 10 kV peak recording,
introducing the security protocols (Secure File Transfer Protocol - SFTP, Secure Shell - SSH) and secured HTTPS to reinforce the Cyber security.
The ION9000T offers for now (2) part numbers METSEION95030 without display and METSEION95040 with remote display.
Please see the following links for both meters’ documentation and the PDF file for the (4) meters comparison table.

CM4000T Documentation: https://www.se.com/ww/en/product-range-download/921-powerlogic-cm4000t/
ION9000T technical Datasheet: Download

 

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.