How to export the Logic in RemoteConnect?
1. Open Logic editor.
2. Under project browser>program>MAST>Sections select the logic program you want to import.
3. Right click on the Logic program and select export.
4. Select the folder were you want to save the program and Type the file name then hit the export button.
How to Import the Logic program?
1. Open Logic Editor.
2. Under project browser>program>MAST>Sections. Right click on the Sections folder then select import.
3. Under Look In: Navigate were the program was saved. Then select the program name and hit Import button.
1. Open Logic editor.
2. Under project browser>program>MAST>Sections select the logic program you want to import.
3. Right click on the Logic program and select export.
4. Select the folder were you want to save the program and Type the file name then hit the export button.
How to Import the Logic program?
1. Open Logic Editor.
2. Under project browser>program>MAST>Sections. Right click on the Sections folder then select import.
3. Under Look In: Navigate were the program was saved. Then select the program name and hit Import button.
Publicerad för:Schneider Electric Sverige
How to export the Logic in RemoteConnect?
1. Open Logic editor.
2. Under project browser>program>MAST>Sections select the logic program you want to import.
3. Right click on the Logic program and select export.
4. Select the folder were you want to save the program and Type the file name then hit the export button.
How to Import the Logic program?
1. Open Logic Editor.
2. Under project browser>program>MAST>Sections. Right click on the Sections folder then select import.
3. Under Look In: Navigate were the program was saved. Then select the program name and hit Import button.
1. Open Logic editor.
2. Under project browser>program>MAST>Sections select the logic program you want to import.
3. Right click on the Logic program and select export.
4. Select the folder were you want to save the program and Type the file name then hit the export button.
How to Import the Logic program?
1. Open Logic Editor.
2. Under project browser>program>MAST>Sections. Right click on the Sections folder then select import.
3. Under Look In: Navigate were the program was saved. Then select the program name and hit Import button.
Publicerad för:Schneider Electric Sverige
