How to set the Ethernet transfer to always be enabled in EcoStruxure Operator Terminal Expert.
Issue:
Every time I need to transfer a new version of a project to the HMI, I have to enable the transfer via Ethernet.
Is it possible to have it permanently set to enabled?
Product Line:
EcoStruxure Operator Terminal Expert (all version)
Resolution:
The fact of always have to re-enable the Ethernet transfer method is normal for cybersecurity reason. But yes, it is possible to set it to always be enabled:
If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance: Support | Schneider Electric Global (se.com)
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.