"Unable to build the logic application" error in RemoteConnect
Problem:
Unable to write RemoteConnect application to SCADAPack x70 RTU due to "Unable to build the logic application" error.
Solution:
Check the logic application in the Logic Editor to ensure it is properly built by updating and building the logic. If the logic application is not built and there is an error during the update and build process, then correct the problem indicated in the program.
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.