Edge Firmware Visibility and Version Verification
When the edge firmware is updated prior to updating the RTU firmware, the edge firmware may not be displayed in Remote Connect.
To verify the edge firmware version:
- Establish an SSH connection to the device using PuTTY.
2. Enter the following command "verinfo"
This will give the edge firmware version.
Publicerad för: Schneider Electric Sverige
Behöver du hjälp?
Produktväljare
Hitta snabbt och enkelt rätt produkter och tillbehör för dina ändamål.
Begär en offert
Ställ din fråga online så kontaktar vi dig.
Här köper du
Hitta enkelt närmaste Schneider Electric-distributör på din ort.
Hjälpcenter
Hitta alla supportresurser som du behöver på ett ställe.