Can a time clock be fitted onto the outgoing way of an Isobar Distribution Board?

The Acti9 Isobar Distribution Boards outgoing ways are designed to be fitted only with iC60H MCB's and RCBO's up to and including 63A.

Time clocks and other Din rail devices cannot be fitted as an outgoing device in a distribution board.

They should be fitted on a din rail.

• In the case of single phase boards, a multiservice single phase distribution board has a din rail already fitted (e.g.: SEA9APN1432MS which has 16 single pole DIN rail ways)

• For a three-phase board, you can use a din rail extension box (such as SEA9BNEX034N), it has a DIN rail with 17 single-pole ways.