How do you fit Acti9 Arc Fault Device (Acti9 Active/iARC) on Isobar P?
Recommended Solution 1:
Acti9 Active AFDDs (iCV40H) can be fitted on Isobar P – Hybrid or Standalone Active distribution boards.
This is the list of AFDDs references that can be used are mentioned below :
Once you have selected the right product, here are the instructions to mount it on Isobar P - Hybrid or Standalone Active distribution boards.
Refer to the instruction sheet: See Attached file.
Recommended Solution 2:
Acti9 iARC AFDDs cannot be fitted directly on the pan assembly of Isobar P distribution boards.
It’s recommended to fit on Acti9 Extension Enclosure. For more details refer below:
https://www.se.com/uk/en/faqs/FAQ000222877/
Acti9 Active AFDDs (iCV40H) can be fitted on Isobar P – Hybrid or Standalone Active distribution boards.
This is the list of AFDDs references that can be used are mentioned below :
- A9TDFD606
- A9TDFD610
- A9TDFD616
- A9TDFD620
- A9TDFD625
- A9TDFD632
Once you have selected the right product, here are the instructions to mount it on Isobar P - Hybrid or Standalone Active distribution boards.
Refer to the instruction sheet: See Attached file.
Recommended Solution 2:
Acti9 iARC AFDDs cannot be fitted directly on the pan assembly of Isobar P distribution boards.
It’s recommended to fit on Acti9 Extension Enclosure. For more details refer below:
https://www.se.com/uk/en/faqs/FAQ000222877/
Released for: Schneider Electric UK
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.