Issue:
Identifying what kind of starter is needed for a particular application
Product Line:
NEMA and Definite Purpose Contactors and Starters
Environment:
Reduced Voltage starter
Resolution:
Open transition is best for high inertial loads and closed transition is best for frictional type loads. An open transition starter will disconnect the motor from the line at the time of transition. The closed transition uses an additional contactor and power resistors so that the motor is never disconnected from power during starting.
Identifying what kind of starter is needed for a particular application
Product Line:
NEMA and Definite Purpose Contactors and Starters
Environment:
Reduced Voltage starter
Resolution:
Open transition is best for high inertial loads and closed transition is best for frictional type loads. An open transition starter will disconnect the motor from the line at the time of transition. The closed transition uses an additional contactor and power resistors so that the motor is never disconnected from power during starting.
Released for:Schneider Electric USA
