Replacement I/O connectors for HMISCU?

Issue:

Please provide part number for replacement I/O connectors or kit for HMISAC rear module for HMISCU8B5. Reference A & B pin and C & D 15 pin connectors shown on page 116 of manual EIO0000001232 dated 8/2021.

Product Line:

HMISCU, HMISAC, HMISBC

Resolution:

The part number for the HMISCU IO replacement terminal blocks kit is HMIZSDIO.

This part number was discontinued March 13, 2024 and there is no replacement.

Below is the equivalent for the required terminal blocks

You need two of each for a single unit.

They are the same for HMISAC (Digital I/O only) and SBC (Analog+ Digital I/O)

In black color:

6 pins

https://www.phoenixcontact.com/en-us/products/pcb-plug-fmc-15-6-st-35-rf-bk-cn6-1014469

15 pins

https://www.phoenixcontact.com/en-be/products/fmc-15-15-st-35-rf-bk-1761263

In green color:

6 pins

https://www.phoenixcontact.com/en-us/products/pcb-plug-fmc-15-6-st-35-rf-1952063

15 pins

https://www.phoenixcontact.com/en-us/products/pcb-plug-fmc-1515-st-35-rf-1952157

If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance: Support | Schneider Electric Global (se.com)

Đã phát hành cho: Schneider Electric Việt Nam