How do I find the unknown IP address of a Modbus Serial-to-TCP Gateway?
Issue:
How to find the unknown IP address of a Modbus Serial-to-TCP Gateway?
Product Line:
EGX100
ETG100
EGX300
EGX150 (Link 150)
Com'X
Environment:
Internet Explorer
WireShark
Resolution:
The lost IP address of a Modbus Serial-to-TCP Gateway can be found by examining the
WireShark trace of the Ethernet TCP/IP communications using the following steps.
This method can also be used for mostly any ethernet-based device.
- Download WireShark from https://www.wireshark.org/download.html
- Launch WireShark
- Select the active Ethernet adapter on the PC to start the WireShark trace.
- Power-Cycle the Modbus Serial-to-TCP Gateway.
When the Gateway reboots, it will send a Gratuitous ARP from the MAC Address with the IP address of the gateway which can be seen in the trace. - Confirm this is the IP address by using an Internet Explorer browser to connect to the embedded web pages on the gateway.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.