What does the error light flashing slowly on the M221 mean?
The error light flashing slowly on the M221 is a Minor error has been detected and the controller has detected an error but can remain running. This could be caused by a bad I/O card in the configuration.
If SL LED is blinking, this is generally an indication that the PLC is attempting to communicate over the serial port. The internal program may include serial communication to anther device so the SL LED is used to indicated communication is active.
The user guide for M221 can be found at this link.
You can find information regarding all status LED functions and descriptions in the user guide.
Search the ser guide for " table describes the status LEDs" , to find details on what each LED represents and what the behavior of the LED's mean.
Опубліковано для: Schneider Electric Україна
Потрібна допомога?
Почніть тут!
Знайдіть відповіді зараз. Шукайте рішення самостійно або зверніться до нашого експерта.
Звернутися до служби підтримки
Якщо вам потрібна допомога, додаткова інформація чи технічна підтримка або ви хочете подати скаргу, зв’яжіться з нашою командою з обслуговування клієнтів.
Де придбати?
Зручний пошук найближчого дистриб’ютора, магазина або спеціалізованого партнера Schneider Electric у вашому регіоні.
Переглянути відповіді на поширені запитання
Отримайте необхідну інформацію, переглянувши відповіді на поширені запитання за відповідними темами.