Browse FAQs

Can GFCI breakers or outlets be used with Altivar Drives?

Published date: 19 June 2020

Can GFCI breakers or outlets be used with Altivar Drives?
Product Line:
ALTIVAR, ATV12, ATV71, ATV320, ATV600, ATV900


GFCI breaker is tripping randomly

Because drives produce high level of leakage current, and depending of the sensibility of the breaker, tripping can occur.
At the start up of the drive, the capacitor bank is charging and we see the peak of leakage current. This peak is higher when there is more than one drive after the breaker.
Also, it's dependant on many installation parameters such as motor cable type, motor cable length, switching frequency, motor, ground connection.

To avoid the random tripping of breaker due to earth leakage, it is recommended to use GFCI called full immunized type A "SI" that is reinforced against high frequency leakage current.

It is not recommend by Schneider Electric; however, there is a company called Bender that can provide these.

Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.