Main range of productOsiSense XM product or component typeElectronic pressure sensors pressure sensor typePressure transmitter pressure switch type of operationPressure transmitter with 1 switching output device short nameXMLR pressure sensor size59984.39 kPa600 bar maximum permissible accidental pressure149960.96 kPa1500 bar150 MPa destruction pressure250 MPa249934.94 kPa2500 bar controlled fluidFresh water (0…80 °C)Air (-20…80 °C)Hydraulic oil (-20…80 °C)Refrigeration fluid (-20…80 °C) fluid connection typeG 1/4 (female) conforming to DIN 3852-Y [Us] rated supply voltage24 V DC SELV (voltage limits: 17…33 V) Complementary current consumption<= 50 mA electrical connectionMale connector M12, 4 pins analogue output function0...10 V type of output signalAnalogue + discrete analogue output function0...10 V discrete output typeSolid state PNP, NO/NC programmable maximum switching current250 mA contacts type and compositionNO/NC programmable scale typeFixed differential maximum voltage drop2 V adjustable range of switching point on rising pressure4.8…60 MPa4798.75…59984.39 kPa48…600 bar adjustable range of switching point on falling pressure30…582 bar2999.22…58184.85 kPa3…58.2 MPa minimum differential travel1799.53 kPa1.8 MPa18 bar materials in contact with fluid316L stainless steel front materialPolyester housing materialPolyacrylamide316L stainless steel operating positionAny position, but disposals can falsified the measurement in case of upside down mounting protection typeOvervoltage protectionReverse polarityOverload protectionShort-circuit protection response time on output<= 10 ms for analog output<= 5 ms for discrete output switching output time delay0...50 s in steps of 1 second display type4 digits 7 segments local signalling1 LED (yellow) for light ON when switch is actuated display response time typeFast 50 msNormal 200 msSlow 600 ms maximum delay first up300 ms overall accuracy<= 1 % of the measuring range linearity error on analogue output<= 0.5 % of the measuring range hysteresis on analogue output<= 0.2 % of the measuring range measurement accuracy on switching output<= 0.6 % of the measuring range repeat accuracy<= 0.2 % of the measuring range drift of the sensitivity+/- 0.03 % of measuring range/°C drift of the zero point+/- 0.1 % of measuring range/°C display accuracy<= 1 % of the measuring range mechanical durability10000000 cycles depth42 mm height88 mm width41 mm net weight0.186 kg [Uimp] rated impulse withstand voltage0.5 kV DC electromagnetic compatibilitySusceptibility to electromagnetic fields: 10 V/m 80...2000 MHz conforming to EN/IEC 61000-4-3Immunity to conducted RF disturbances: 10 V 0.15...80 MHz conforming to EN/IEC 61000-4-6Surge immunity test: 1 kV conforming to EN/IEC 61000-4-5Electrical fast transient/burst immunity test: 2 kV conforming to EN/IEC 61000-4-4Electrostatic discharge immunity test: 8 kV air, 4 kV contact conforming to EN/IEC 61000-4-2 Environment markingCE product certificationsCULusEAC standardsEN/IEC 61326-2-3UL 61010-1 ambient air temperature for operation-20…80 °C ambient air temperature for storage-40…80 °C IP degree of protectionIP65 conforming to EN/IEC 60529IP67 conforming to EN/IEC 60529 vibration resistance20 gn (f= 10…2000 Hz) conforming to EN/IEC 60068-2-6 shock resistance50 gn conforming to EN/IEC 60068-2-27 Packing Units Unit Type of Package 1PCE Number of Units in Package 11 Package 1 Weight181 g Package 1 Height6.5 cm Package 1 width7.5 cm Package 1 Length12.7 cm Offer Sustainability REACh Regulation REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)Fluid entry: G 1/4 A female
Connections and SchemaConnections and SchemaConnector Wiring(1)I Out or V Out
Performance CurvesAnalogue Output Description
Analogue Output SignalX :PressureY :Analogue output signal(1)An offset of +/-5% of nominal pressure can be compensated (with Cof Configuration menu. Cof: Offset Compensation)(2)The Analogue curve can be adjusted from -25% to +25% of nominal pressure (with AEP Confi