ATV11PU12M2E380 is replaced by:
The maximum number of products that can be compared is 4. Remove already added products.
- Reason for Substitution: End of life
- Substitution date: 01 July 2009
Main range of productAltivar 11 product or component typeVariable speed drive product specific applicationSimple machine component nameATV11 application marketPump mounting supportBase plate EMC filterIntegrated built-in fanWithout network number of phases1 phase [Us] rated supply voltage200...240 V - 15...10 % supply frequency50...60 Hz - 5...5 % motor power kW0.55 kW line current6.3 A at 230 V, Isc = 1 kA nominal output current3 A 230 V motor 4 kHz maximum transient current4.5 A for 60 s power dissipation in W29 W at nominal load switching frequency2...12 kHz adjustable4...12 kHz with derating factor braking torque150 % of nominal motor torque with braking resistor at high inertia20 % of nominal motor torque without braking resistor at no load80 % of nominal motor torque with braking resistor at no load asynchronous motor control profileSensorless flux vector control with PWM type motor control signal electrical connectionTerminal, clamping capacity: 1.5 mm², AWG 14 (AI1, RA-RC, LI1...LI4, DO)Terminal, clamping capacity: 4 mm², AWG 10 (L1, L2, L3, U, V, W, PA, PC) supplyInternal supply for logic inputs: 15 V (+/- 15 %) 100 A, protection type: overload and short-circuit protectionInternal supply for reference potentiometer (2.2 to 10 kOhm): 5...5.25 VDC 10 A, protection type: overload and short-circuit protection analogue input typeConfigurable current AI1 4...20 mA 250 Ohm without adding resistorConfigurable voltage AI1 0...5 V 40000 Ohm only with internal supplyConfigurable current AI1 0...20 mA 250 OhmConfigurable voltage AI1 0...10 V 40000 Ohm sampling durationAI1: 20 ms analogLI1...LI4: 20 ms discrete response time20 ms DO linearity errorDO: +/- 1 % for outputAI: +/- 5 % for input discrete input typeAssignable Ll1 forward 5000 Ohm 15 V 24 VAssignable Ll2 reverse 5000 Ohm 15 V 24 VAssignable Ll3/Ll4 4 preset speeds 5000 Ohm 15 V 24 V discrete input logicPositive logic (source) (LI1...LI4), < 5 V (state 0), > 11 V (state 1)Negative (LI1...LI4), > 11 V (state 0), < 5 V (state 1) discrete output typeAssignable as external voltage DO 30 V max, 30 mAAssignable as open collector logic output DO 100 Ohm, 50 mA maxFactory set as PWM open collector output DO at 2 kHz 10 mA maxProtected relay logic RA-RC 1 NOAssignable as internal voltage DO minimum switching currentRA-RC 10 mA at 24 V DC maximum switching current2 A 250 V AC inductive cos phi = 0.4 7 ms RA-RC2 A 30 V DC inductive cos phi = 0.4 7 ms RA-RC5 A 250 V AC resistive cos phi = 1 0 ms RA-RC5 A 30 V DC resistive cos phi = 1 0 ms RA-RC protection typeLine supply overvoltage: driveLine supply undervoltage: driveOverheating protection: driveShort-circuit between motor phases: driveThermal protection: motorOvercurrent between output phases and earth: drive frequency resolutionDisplay unit: 0.1 HzAnalog input: converter A/D, 10 bits electromagnetic compatibility1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to EN/IEC 61000-4-5Electrical fast transient/burst immunity test level 4 conforming to EN/IEC 61000-4-4Electrostatic discharge immunity test level 3 conforming to EN/IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 conforming to EN/IEC 61000-4-3 maximum motor cable length10 m without additional EMC filter from 2 to 16 kHz conforming to EN 55011 class A group 110 m without additional EMC filter from 2 to 16 kHz conforming to EN 55022 class A group 120 m with additional EMC filter from 2 to 16 kHz conforming to EN 55011 class B5 m without additional EMC filter from 2 to 12 kHz conforming to EN 55011 class B5 m without additional EMC filter from 2 to 12 kHz conforming to EN 55022 class B50 m with additional EMC filter from 2 to 16 kHz conforming to EN 55011 class A group 1 vibration resistance1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-61.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 shock resistance15 gn for 11 ms conforming to EN/IEC 60068-2-27 relative humidity5…93 % without condensation conforming to IEC 60068-2-35…93 % without dripping water conforming to IEC 60068-2-3 ambient air temperature for operation-10…40 °C without40…50 °C by removing the protective cover from the top of the drive50…60 °C by removing the protective cover from the top of the drive with current derating of 2.2 % per °C operating altitude<= 1000 m without Complementary product destinationAsynchronous motors supply voltage limits170…264 V network frequency limits47.5…63 Hz speed drive output frequency0…200 Hz nominal switching frequency4 kHz speed range1…20 transient overtorque150...170 % of nominal motor torque regulation loopAdjustable frequencyFactory-set with the speed loop stability and gainPossible correction for machines with high resistive torque/inertia/fast cycles motor slip compensationAdjustablePreset in factory prospective line Isc1 kA output voltage<= power supply voltage insulationElectrical between power and control analogue input number1 discrete input number4 discrete output number2 acceleration and deceleration rampsLinear from 0 to 99.9 s braking to standstillBy DC injection insulation resistance> 500 MOhm markingCE operating positionVertical +/- 10 degree outer dimension142 x 72 x 108 mm net weight0.9 kg Environment standardsEN 50178 product certificationsN998ULCSAC-Tick IP degree of protectionIP20 ambient air temperature for storage-25…65 °C
- All Languages1
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.