Main range of productModicon Momentum automation platform product or component typeDiscrete inputs base DC group of channels1 group of 16 inputs discrete input number16 conforming to IEC 1131-2 Type 1 discrete input voltage24 V DC protective treatmentTC Complementary discrete input logicPositive input voltage limits24 V voltage range- 3...30 V voltage state 0 guaranteed-3...5 V voltage state 1 guaranteed11...30 V current state 0 guaranteed<= 1.2 mA current state 1 guaranteed>= 2.5 mA input resistance4 kOhm response time2.2 ms from state 0 to state 13.3 ms from state 1 to state 0 isolation between channels and bus500 V AC power dissipation5 W maximum3 W typical terminals description PLC n°1(8)IN_DIS#8(5)IN_DIS#5(16)IN_DIS#16(4)IN_DIS#4(3)IN_DIS#3(13)IN_DIS#13(14)IN_DIS#14(10)IN_DIS#10(L+)PW_POS(M-)PW_NEG(6)IN_DIS#6(7)IN_DIS#7(1)IN_DIS#1(11)IN_DIS#11(9)IN_DIS#9(15)IN_DIS#15(12)IN_DIS#12TB(2)IN_DIS#2 markingCE local signalling16 LEDschannel status: current consumption<= 250 mA at 24 V DC depth47.5 mm height141.5 mm width125 mm net weight0.19 kg Environment product certificationsFM Class 1 Division 2CSAUL resistance to electrostatic discharge4 kV contact conforming to IEC 801-28 kV on air conforming to IEC 801-2 resistance to electromagnetic fields10 V/m 80...1000 MHz conforming to IEC 801-3 ambient air temperature for operation0…60 °C ambient air temperature for storage-40…85 °C relative humidity95 % without condensation operating altitude<= 5000 m Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
User guideFormatSizeAdd to My Documentsprp.document.label.format pdfSize 4.3 MBDate 12/1/18DescriptionThis manual contains complete information about the Momentum I/O bases. It contains only passing references to other Momentum components, including processor adapters, option adapters, and communication adapters.prp.document.label.format pdfSize 1.1 MBDate 12/1/18DescriptionThis manual describes how to install hardware and software for the Momentum communicator on a Fipio bus.CADFormatSizeAdd to My Documentsprp.document.label.format zipSize 77.1 KBDate 1/13/05CertificateFormatSizeAdd to My Documentsprp.document.label.format zipSize 343.5 KBDate 12/17/19Instruction sheetFormatSizeAdd to My Documentsprp.document.label.format pdfSize 573.7 KBDate 10/1/10DescriptionRecently revised to meet new Interbus standards for electrical noise immunity, select Momentum products have been updated with an additional ground screw. This second ground screw is being added to all new and upgraded Momentum products.China RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages25
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsStandard Adapter on a Typical BaseDimensions
Mounting and ClearanceMounting on a Wall
Connections and SchemaExternal Wiring Diagrams2-Wire Device3- and 4-Wire DevicesInternal Pin Connections
Rows 1 through 3 show the internal connections between terminals on the I/O base. Row 4 shows the internal connections on the optional busbar.