Welcome to the Schneider Electric corporate Website

Select your location

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
View all   Sepam Series 80 NPP
Schneider Electric 59737 Image


Schneider Electric 59737 Image

motor - M87 - Sepam series 80

Show more characteristics
The maximum number of products that can be compared is 4. Remove already added products.

  • Main
    relay application
    range of product
    Sepam series 80
    Sepam series 80 NPP
    device short name
    control and monitoring type
    Circuit breaker/contactor control ANSI code: 94/69 (option)
    Latching/acknowledgement ANSI code: 86
    Logic discrimination ANSI code: 68 (option)
    Switching of groups of settings
    Annunciation ANSI code: 30
    Logipam programming (ladder language) (option)
    Logic equation editor 200 operators
    Load shedding/automatic restart
    metering type
    Positive sequence voltage Vd/rotation direction
    Calculated active and reactive energy (+/- W.h, +/- VAR.h)
    Active and reactive energy by pulse counting (+/- W.h, +/- VAR.h) (option)
    Phase current I1, I2, I3 RMS
    Demand current I1, I2, I3
    Peak demand current IM1, IM2, IM3
    Measured residual current I'0
    Voltage U21, U32, U13, V1, V2, V3
    Residual voltage V0
    Negative sequence voltage Vi
    Active power P, P1, P2, P3
    Reactive power Q, Q1, Q2, Q3
    Apparent power S, S1, S2, S3
    Peak demand power PM, QM
    Power factor
    Temperature (16 RTDs) (option)
    Phase current I'1, I'2, I'3 RMS
    Rotation speed (option)
    Neutral point voltage Vnt
    Measured residual current I0, calculated I'0∑
    Calculated residual current I'0∑
    network and machine diagnosis type
    Unbalance ratio/negative sequence current Ii
    Disturbance recording
    Thermal capacity used
    Remaining operating time before overload tripping
    Waiting time after overload tripping
    Running hours counter/operating time
    Starting current and time
    Start inhibit time, number of starts before inhibition
    Tripping context
    Phase fault and earth fault trip counters
    Harmonic distortion (THD), current and voltage Ithd, Uthd
    Apparent positive sequence impedance Zd
    Apparent phase-to-phase impedances Z21, Z32, Z13
    Differential current Idiff1, idiff2, Idiff3
    Through current It1, It2, It3
    Current phase displacement θ
    Phase displacement
    Datalog (DLG)
    Motor start report (MSR)
    Motor start trend (MST)
    switchgear diagnosis type
    Cumulative breaking current
    CT/VT supervision ANSI code: 60FL
    Trip circuit supervision ANSI code: 74 (option)
    Auxiliary power supply monitoring
    Nb of operations, operating time, charging time, nb of racking out operations (option)
    type of measurement
    Power (P,Q)
    Peak demand power
    Power factor
    Harmonic distorsion (I THD & U THD)
    Rotation speed
    protection type
    Phase undercurrent ANSI code: 37
    Starts per hour ANSI code: 66
    Neutral voltage displacement ANSI code: 59N
    Breaker failure ANSI code: 50BF
    Directional earth fault ANSI code: 67N/67NC
    Overvoltage (L-L or L-N) ANSI code: 59
    Temperature monitoring (16 RTDs) ANSI code: 38/49T (option)
    Thermal overload for machines ANSI code: 49RMS
    Excessive starting time, locked rotor ANSI code: 48/51LR
    Field loss (underimpedance) ANSI code: 40
    Pole slip ANSI code: 78PS
    Overspeed (2 set points) ANSI code: 12 (option)
    Underspeed (2 set points) ANSI code: 14 (option)
    Directional reactive overpower ANSI code: 32Q
    Machine differential ANSI code: 87M
    Negative sequence/unbalance ANSI code: 46
    Overfrequency ANSI code: 81H
    Underfrequency ANSI code: 81L
    Positive sequence undercurrent ANSI code: 27D
    Remanent undervoltage ANSI code: 27R
    Undervoltage (L-L or L-N) ANSI code: 27
    Negative sequence overvoltage ANSI code: 47
    Phase overcurrent ANSI code: 50/51
    Earth fault/sensitive earth fault ANSI code: 50N/51N
    Earth fault/sensitive earth fault ANSI code: 50G/51G
    Directional active overpower ANSI code: 32P
    communication port protocol
    Measurement readout ( option ) : Modbus
    Remote indication and time tagging of events ( option ) : Modbus
    Remote control orders ( option ) : Modbus
    Remote protection setting ( option ) : Modbus
    Transfer of disturbance recording data ( option ) : Modbus
    input output max capacity
    42 inputs + 23 outputs
    communication compatibility
    IEC 61850
    Modbus RTU
    Modbus TCPIP
    IEC 61850 goose message
    IEC 60870-5-103
    user machine interface type
    Packing Units
    Package 1 Weight
    0.001 kg
    Package 1 Height
    0.010 dm
    Package 1 width
    0.010 dm
    Package 1 Length
    0.020 dm
  • View more View less


    • All Languages2
    • English1
    • French1
    Add to My Documents
    prp.document.label.format pdf
    Size 31 MB
    Date 3/4/18
    Edition 2018
    User guide
    Add to My Documents
    prp.document.label.format pdf
    Size 11.4 MB
    Date 9/1/17
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.