Main range of productModicon ABE7 product or component typeDiscrete output sub-base [Us] rated supply voltage24 V DC for controller side24 V DC for sensor/controller side number of channels16 number of terminal per channel2 connections - terminalsScrew type terminals, 1 x 0.09...1 x 1.5 mm² (AWG 28...AWG 16) flexible with cable endScrew type terminals, 1 x 0.14...1 x 2.5 mm² (AWG 26...AWG 12) solidScrew type terminals, 1 x 0.14...1 x 2.5 mm² (AWG 26...AWG 14) flexible without cable endScrew type terminals, 2 x 0.09...2 x 0.75 mm² (AWG 28...AWG 20) flexible with cable endScrew type terminals, 2 x 0.2...2 x 2.5 mm² (AWG 28...AWG 16) solid connector destinationTwido programmable controller Complementary supply voltage limits19…30 V DC conforming to IEC 61131-2 (controller side)19…30 V DC conforming to IEC 61131-2 (sensor/controller side) discrete output number16 relay output(s), 3000 mA discrete output voltage110...250 V AC relay output(s)24 V DC solid state output(s)5...30 V DC relay output(s) discrete output function1 NO product compatibilityTWDDDO16TKTWDDDO32TK status LED1 LED for power ON polarity distribution1 common/4 channels for relay output short-circuit protection2 A internal fuse, 5 x 20 mm, fast blow (controller side) connector typeHE-10 pin number20 fixing modeBy clips, mounting on 35 mm symmetrical DIN rail conforming to IEC 60715By screws maximum supply current2 A current per channel0.009 A relay output(s) switched current3000 mA for relay output maximum current per output common5 A for relay output voltage drop on power supply fuse0.3 V voltage state 0 guaranteed2 V relay output(s) (sensor/controller side) voltage state 1 guaranteed16.8 V relay output(s) electrical durability500000 cycles, maximum switching current: 2000 mA AC-12 relay output(s) (preactuator side)500000 cycles, maximum switching current: 3000 mA DC-12 relay output(s) (preactuator side)500000 cycles, maximum switching current: 400 mA AC-15 relay output(s) (preactuator side)500000 cycles, maximum switching current: 500 mA DC-13 relay output(s) (preactuator side) minimum switching current100 mA relay output(s) response time<= 2.5 ms from state 1 to 0 relay output(s)<= 5 ms from state 0 to 1 relay output(s) [Uimp] rated impulse withstand voltage6 kV relay output(s) switching frequency20 Hz relay mechanical durability20000000 cycles at 20 °C [Ui] rated insulation voltage2000 V between terminals/mounting rails300 V between coil circuit/contact circuits conforming to IEC 60947-1 overvoltage categoryII conforming to IEC 60664-1 tightening torque0.6 N.m with flat Ø 3.5 mm screwdriver net weight0.43 kg Environment product certificationsCSAUL IP degree of protectionIP2x conforming to IEC 60529 resistance to incandescent wire750 °C conforming to IEC 60695-2-11 shock resistance15 gn for 11 ms conforming to IEC 60068-2-27 vibration resistance2 gn (f= 10…150 Hz) conforming to IEC 60068-2-6 resistance to electrostatic discharge4 kV (contact) level 3 conforming to IEC 61000-4-28 kV (air) level 3 conforming to IEC 61000-4-2 resistance to radiated fields10 V/m (80000000…2000000000 Hz) conforming to IEC 61000-4-3 level 3 resistance to fast transients2 kV level 3 conforming to IEC 61000-4-4 ambient air temperature for operation-5…60 °C conforming to IEC 61131-2 ambient air temperature for storage-40…80 °C conforming to IEC 61131-2 pollution degree2 conforming to IEC 60664-1 Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsUser guideFormatSizeAdd to My DocumentsCADFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My DocumentsREACh DeclarationFormatSizeAdd to My Documents
- All Languages20
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)ABE7BV10 / BV20 / BV20TB
Mounting and ClearanceMounting
Connections and SchemaHE10 16 ChannelsWiring Diagram(1)Inductive load
Performance CurvesCurves for Determining Cable Type and Length According to the CurrentLCable lengthITTotal current per sub base (A)IAAverage current per channel (mA)(1)Cables ABFT2••••• c.s.a. 0.08 mm2 (AWG 28)
The curves are given for a voltage drop of 1 V in the cable. For n volts tolerance, multiply the length determined from the graph by n.Temperature Derating CurvesElectromechanical Relay Outputs(1)100 % of channels used(2)50 % of channels usedElectrical Durability (in Millions of Operating Cycles) Conforming to IEC 60947-5-1DC Loads
DC12 curvesDC12control of resistive loads and of solid state loads isolated by optocoupler, l/R ≤ 1 ms.
DC13 curvesDC13switching electromagnets, L/R ≤ 2 x (Ue x Ie) in ms, Ue: rated operational voltage, Ie: rated operational current (with a protective diode on the load, DC12 curves must be used with a coefficient of 0.9 applied to the number in millions of operating cycles)AC Loads
AC12 curvesAC12control of resistive loads and of solid state loads isolated by optocoupler, cos ϕ ≥ 0.9.
AC14 curvesAC14control of small electromagnetic loads ≤ 72 VA, make: cos ϕ = 0.3, break: cos ϕ = 0.3.
AC15 curvesAC15control of electromagnetic loads > 72 VA, make: cos ϕ = 0.7, break: cos ϕ = 0.4.