ATV11HU18M2U402 is replaced by:
The maximum number of products that can be compared is 4
- Reason for Substitution: End of life
- Substitution date: 01 July 2009
Main range of productAltivar product or component typeVariable speed drive product specific applicationSimple machine component nameATV11 application marketUSA market assembly styleWith heat sink EMC filterWithout EMC filter built-in fanWith network number of phasesSingle phase [Us] rated supply voltage200...240 V - 15...10 % supply frequency50...60 Hz - 5...5 % motor power kW0.75 kW motor power hp1 hp line current9.9 A at 208 V, Isc = 1 kA nominal output current4.6 A 230 V motor 4 kHz maximum transient current6.3 A for 60 s power dissipation in W43 W at nominal load switching frequency2...16 kHz adjustable4...16 kHz with derating factor braking torque150 % of nominal motor torque with braking resistor at high inertia20 % of nominal motor torque without braking resistor at no load80 % of nominal motor torque with braking resistor at no load asynchronous motor control profileSensorless flux vector control with PWM type motor control signal electrical connectionTerminal, clamping capacity: 1.5 mm², AWG 14 (AI1, RA-RC, LI1...LI4, DO)Terminal, clamping capacity: 1.5 mm², AWG 14 (L1, L2, L3, U, V, W, PA, PC) supplyInternal supply for logic inputs: 15 V (+/- 15 %) 100 mA, protection type: overload and short-circuit protectionInternal supply for reference potentiometer (2.2 to 10 kOhm): 5...5.25 VDC 10 mA, protection type: overload and short-circuit protection analogue input typeConfigurable current AI1 4...20 mA 250 Ohm without adding resistorConfigurable voltage AI1 0...5 V 40000 Ohm only with internal supplyConfigurable current AI1 0...20 mA 250 OhmConfigurable voltage AI1 0...10 V 40000 Ohm sampling durationAI1: 20 ms analogLI1...LI4: 20 ms discrete response time20 ms DO linearity errorDO: +/- 1 % for outputAI: +/- 5 % for input discrete input typeAssignable Ll1 forward 5000 Ohm 15 V 24 VAssignable Ll2 reverse 5000 Ohm 15 V 24 VAssignable Ll3/Ll4 4 preset speeds 5000 Ohm 15 V 24 V discrete input logicNegative (LI1...LI4), > 11 V (state 0), < 5 V (state 1)Positive logic (source) (LI1...LI4), < 5 V (state 0), > 11 V (state 1) discrete output typeAssignable as external voltage DO 30 V max, 30 mAAssignable as open collector logic output DO 100 Ohm, 50 mA maxFactory set as PWM open collector output DO at 2 kHz 10 mA maxProtected relay logic RA-RC 1 NOAssignable as internal voltage DO minimum switching currentRA-RC 10 mA at 24 V DC maximum switching current2 A 250 V AC inductive cos phi = 0.4 7 ms RA-RC2 A 30 V DC inductive cos phi = 0.4 7 ms RA-RC5 A 250 V AC resistive cos phi = 1 0 ms RA-RC5 A 30 V DC resistive cos phi = 1 0 ms RA-RC protection typeLine supply overvoltage: driveLine supply undervoltage: driveOvercurrent between output phases and earth: driveOverheating protection: driveShort-circuit between motor phases: driveThermal protection: motor frequency resolutionDisplay unit: 0.1 HzAnalog input: converter A/D, 10 bits electromagnetic compatibility1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to EN/IEC 61000-4-5Electrical fast transient/burst immunity test level 4 conforming to EN/IEC 61000-4-4Electrostatic discharge immunity test level 3 conforming to EN/IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 conforming to EN/IEC 61000-4-3 maximum motor cable length20 m with additional EMC filter from 2 to 16 kHz conforming to EN 55011 class A group 15 m with additional EMC filter from 2 to 16 kHz conforming to EN 55011 class B vibration resistance1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-61.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 shock resistance15 gn for 11 ms conforming to EN/IEC 60068-2-27 relative humidity5…93 % without condensation conforming to IEC 60068-2-35…93 % without dripping water conforming to IEC 60068-2-3 ambient air temperature for operation-10…40 °C without40…50 °C by removing the protective cover from the top of the drive50…60 °C by removing the protective cover from the top of the drive with current derating of 2.2 % per °C operating altitude<= 1000 m without> 1000 m with current derating 1 % per 100 m Complementary product destinationAsynchronous motors supply voltage limits170…264 V network frequency limits47.5…63 Hz speed drive output frequency0…200 Hz nominal switching frequency4 kHz speed range1…20 transient overtorque150...170 % of nominal motor torque regulation loopAdjustable frequencyPossible correction for machines with high resistive torque/inertia/fast cyclesFactory-set with the speed loop stability and gain motor slip compensationPreset in factoryAdjustable prospective line Isc1 kA output voltage<= 2 x power supply voltage insulationElectrical between power and control analogue input number1 discrete input number4 discrete output number2 acceleration and deceleration rampsLinear from 0 to 99.9 s braking to standstillBy DC injection insulation resistance>= 500 mOhm markingCE operating positionVertical +/- 10 degree CAD overall width72 mm CAD overall height147 mm CAD overall depth138 mm outer dimension142 x 72 x 101 mm net weight1.8 kg Environment standardsEN 50178 product certificationsC-TickN998ULCSA IP degree of protectionIP20 ambient air temperature for storage-25…65 °C
User guideFormatSizeAdd to My Documentsprp.document.label.format pdfSize 1.5 MBDate 9/1/06DescriptionAltivar ATV11...A VFD / VSD variable speed drive controllers for asynchronous motors. This document includes information on setting up the drive, connections, configurations, start up. Also includes dimensions, mounting the drive, wiring diagrams, keypad functions, menu logic, and troubleshooting.
- All Languages1
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.