Welcome to the Schneider Electric corporate Website

Select your location

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
View all   Altivar 32
Schneider Electric ATV32HU22M2 Image
To be discontinued

ATV32HU22M2

Schneider Electric ATV32HU22M2 Image
To be discontinued
ATV32HU22M2

variable speed drive ATV32 - 2.2 kw - 200 V - 1 phase - with heat sink

Show more characteristics
The maximum number of products that can be compared is 4. Remove already added products.

ATV32HU22M2 is replaced by:
Product
Qty
ATV320U22M2B
Qty
1
The maximum number of products that can be compared is 4. Remove already added products.
  • Reason for Substitution: End of life
  • Substitution date: 03 May 2016
1
  • Main
    range of product
    Altivar 32
    product or component type
    Variable speed drive
    product destination
    Synchronous motors
    Asynchronous motors
    product specific application
    Complex machines
    function available
    -
    assembly style
    With heat sink
    component name
    ATV32
    EMC filter
    Class C2 EMC filter integrated
    network number of phases
    1 phase
    [Us] rated supply voltage
    200...240 V - 15...10 %
    supply voltage limits
    170…264 V
    supply frequency
    50...60 Hz - 5...5 %
    network frequency
    47.5...63 Hz
    motor power kW
    2.2 kW at 200...240 V
    motor power hp
    3 hp at 200...240 V
    Complementary
    line current
    20.1 A for 240 V 1 phase 2.2 kW / 3 hp
    23.9 A for 200 V 1 phase 2.2 kW / 3 hp
    apparent power
    4.8 kVA at 240 V 1 phase 2.2 kW / 3 hp
    prospective line Isc
    1 kA for 1 phase
    nominal output current
    11 A at 4 kHz 240 V 2.2 kW / 3 hp
    maximum transient current
    16.5 A for 60 s 2.2 kW / 3 hp
    output frequency
    0.0005…0.599 kHz
    nominal switching frequency
    4 kHz
    switching frequency
    2...16 kHz adjustable
    speed range
    1…100 for asynchronous motor in open-loop mode
    speed accuracy
    +/- 10 % of nominal slip 0.2 Tn to Tn
    torque accuracy
    +/- 15 %
    transient overtorque
    170…200 %
    braking torque
    <= 170 % with braking resistor
    asynchronous motor control profile
    Voltage/frequency ratio, 5 points
    Voltage/frequency ratio - Energy Saving, quadratic U/f
    Flux vector control without sensor - Energy Saving, NoLoad law
    Flux vector control without sensor, standard
    Voltage/frequency ratio, 2 points
    synchronous motor control profile
    Vector control without sensor
    regulation loop
    Adjustable PID regulator
    motor slip compensation
    Automatic whatever the load
    Not available in voltage/frequency ratio (2 or 5 points)
    Adjustable 0...300 %
    local signalling
    1 LED red for drive voltage
    1 LED green for CANopen run
    1 LED red for CANopen error
    1 LED red for drive fault
    output voltage
    <= power supply voltage
    noise level
    43 dB conforming to 86/188/EEC
    insulation
    Electrical between power and control
    electrical connection
    Screw terminal, clamping capacity: 4 mm², AWG 10 (power supply)
    Screw terminal, clamping capacity: 0.5...1.5 mm², AWG 18...AWG 14 (control)
    Removable screw terminals, clamping capacity: 1.5...2.5 mm², AWG 14...AWG 12 (motor/braking resistor)
    tightening torque
    0.5 N.m, 4.4 lb/ft (control)
    0.7 N.m, 7.1 lb/ft (motor/braking resistor)
    0.6 N.m, 5.3 lb/ft (power supply)
    supply
    Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
    analogue input number
    3
    analogue input type
    AI1 voltage: 0...10 V DC, impedance: 30000 Ohm, resolution 10 bits
    AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30000 Ohm, resolution 10 bits
    AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits
    sampling duration
    2 ms (AI1, AI2, AI3) - analog input(s)
    2 ms (AO1) - analog input(s)
    response time
    LI1...LI6 8 ms, tolerance +/- 0.7 ms for logic output(s)
    R1A, R1B, R1C 2 ms for relay output(s)
    R2A, R2C 2 ms for relay output(s)
    accuracy
    +/- 0.2 % (AI1, AI2, AI3) for a temperature of -10...60 °C
    +/- 0.5 % (AI1, AI2, AI3) for a temperature of 25 °C
    +/- 1 % (AO1) for a temperature of 25 °C
    +/- 2 % (AO1) for a temperature of -10...60 °C
    linearity error
    +/- 0.2...0.5 % of maximum value (AI1, AI2, AI3)
    +/- 0.3 % (AO1)
    analogue output number
    1
    analogue output type
    AO1 software-configurable current 0...20 mA, impedance: 800 Ohm, resolution 10 bits
    AO1 software-configurable voltage 0...10 V, impedance: 470 Ohm, resolution 10 bits
    discrete output number
    3
    discrete output type
    Configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles
    Configurable relay logic: (R2A, R2B) NO - 100000 cycles
    Logic: (LO)
    minimum switching current
    5 mA at 24 V DC for configurable relay logic
    maximum switching current
    R1: 3 A at 250 V AC resistive load, cos phi = 1
    R1: 4 A at 30 V DC resistive load, cos phi = 1
    R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4
    R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4
    R2: 5 A at 250 V AC resistive load, cos phi = 1
    R2: 5 A at 30 V DC resistive load, cos phi = 1
    discrete input number
    7
    discrete input type
    Programmable (sink/source) (LI1...LI4)24...30 V DC, with level 1 PLC
    Programmable as pulse input 20 kpps (LI5)24...30 V DC, with level 1 PLC
    Switch-configurable PTC probe (LI6)24...30 V DC
    Safe torque off (STO)24...30 V DC - 1500 Ohm
    discrete input logic
    Negative logic (sink) (LI1...LI6), > 19 V (state 0), < 13 V (state 1)
    Positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1)
    acceleration and deceleration ramps
    U
    Ramp switching
    Deceleration ramp automatic stop DC injection
    S
    CUS
    Deceleration ramp adaptation
    Linear
    braking to standstill
    By DC injection
    protection type
    Input phase breaks: drive
    Overcurrent between output phases and earth: drive
    Overheating protection: drive
    Short-circuit between motor phases: drive
    Thermal protection: drive
    communication port protocol
    Modbus
    CANopen
    connector type
    1 RJ45 (on front face) for Modbus/CANopen
    physical interface
    2-wire RS 485 for Modbus
    transmission frame
    RTU for Modbus
    type of polarization
    No impedance for Modbus
    number of addresses
    1…127 for CANopen
    1…247 for Modbus
    method of access
    Slave CANopen
    electromagnetic compatibility
    1.2/50 µs - 8/20 µs surge immunity test, level 3 conforming to IEC 61000-4-5
    Conducted radio-frequency immunity test, level 3 conforming to IEC 61000-4-6
    Electrical fast transient/burst immunity test, level 4 conforming to IEC 61000-4-4
    Electrostatic discharge immunity test, level 3 conforming to IEC 61000-4-2
    Radiated radio-frequency electromagnetic field immunity test, level 3 conforming to IEC 61000-4-3
    Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
    width
    60 mm
    height
    325 mm
    depth
    245 mm
    net weight
    2.9 kg
    option card
    Communication card for CANopen daisy chain
    Communication card for CANopen open style
    Communication card for DeviceNet
    Communication card for Ethernet/IP
    Communication card for Profibus DP V1
    Environment
    standards
    EN/IEC 61800-3
    EN 61800-3 environments 2 category C2
    EN 55011 class A group 1
    EN/IEC 61800-5-1
    EN 61800-3 environments 1 category C2
    product certifications
    C-Tick
    NOM 117
    UL
    CSA
    GOST
    marking
    CE
    pollution degree
    2 conforming to EN/IEC 61800-5-1
    IP degree of protection
    IP20 conforming to EN/IEC 61800-5-1
    vibration resistance
    1 gn (f = 13…200 Hz) conforming to EN/IEC 60068-2-6
    1.5 mm peak to peak (f = 3…13 Hz) conforming to EN/IEC 60068-2-6
    shock resistance
    15 gn for 11 ms conforming to EN/IEC 60068-2-27
    relative humidity
    5…95 % without condensation conforming to IEC 60068-2-3
    5…95 % without dripping water conforming to IEC 60068-2-3
    ambient air temperature for operation
    -10…50 °C without derating
    50…60 °C with derating factor
    ambient air temperature for storage
    -25…70 °C
    operating altitude
    <= 1000 m without derating
    1000...2000 m with current derating 1 % per 100 m
    operating position
    Vertical +/- 10 degree
    Packing Units
    Package 1 Weight
    2.713 kg
    Package 1 Height
    1.000 dm
    Package 1 width
    2.750 dm
    Package 1 Length
    3.250 dm
    Contractual warranty
    Warranty
    18 months
  • View more View less

    Documents

    Language
    • All Languages42
    • English22
    • Chinese7
    • French8
    • German6
    • Italian6
    • Portuguese4
    • Russian5
    • Spanish6
    Catalogue
    Format
    Size
    Date
    Add to My Documents
    prp.document.label.format pdf
    Size 4.1 MB
    Date 11/26/19
    prp.document.label.format pdf
    Size 7.3 MB
    Date 11/26/19
    User guide
    Format
    Size
    Date
    Add to My Documents
    BMP Synchronous Motor manual (Version 1.3)
    Description
    ATV32, ATV320
    prp.document.label.format pdf
    Size 1 MB
    Date 1/31/17
    Description
    ATV32, ATV320
    ATV32: safety integrated functions manual (Version 07)
    Description
    The safety functions in Altivar32, allow you to develop applications oriented in the protection of man and machine. The safety functions are configured with SoMove software. The content of this manual is also accessible through the ATV32 DTM online help.
    prp.document.label.format pdf
    Size 4.9 MB
    Date 1/31/17
    Description
    The safety functions in Altivar32, allow you to develop applications oriented in the protection of man and machine. The safety functions are configured with SoMove software. The content of this manual is also accessible through the ATV32 DTM online help.
    prp.document.label.format xlsx
    Size 203.9 KB
    Date 6/18/15
    Description
    Soft V2.5
    prp.document.label.format pdf
    Size 2 MB
    Date 7/31/14
    prp.document.label.format pdf
    Size 962.6 KB
    Date 1/31/14
    ATV32 Quick Start Annex: SCCR (Version 02)
    Description
    Short Circuit Current Ratings (SCCR) and branch circuit protection The combinations in the table have been tested per UL508C. (Reference UL file E116875)
    prp.document.label.format pdf
    Size 124.1 KB
    Date 1/31/14
    Description
    Short Circuit Current Ratings (SCCR) and branch circuit protection The combinations in the table have been tested per UL508C. (Reference UL file E116875)
    prp.document.label.format pdf
    Size 4.2 MB
    Date 10/31/13
    prp.document.label.format pdf
    Size 4.4 MB
    Date 1/31/17
    prp.document.label.format pdf
    Size 1.1 MB
    Date 1/31/17
    prp.document.label.format pdf
    Size 1.1 MB
    Date 1/31/14
    prp.document.label.format pdf
    Size 4.8 MB
    Date 1/31/17
    prp.document.label.format pdf
    Size 1.1 MB
    Date 1/31/17
    prp.document.label.format pdf
    Size 984.2 KB
    Date 1/31/14
    prp.document.label.format pdf
    Size 5 MB
    Date 3/31/10
    prp.document.label.format pdf
    Size 1.1 MB
    Date 1/31/17
    prp.document.label.format pdf
    Size 4.4 MB
    Date 1/31/17
    prp.document.label.format pdf
    Size 967.7 KB
    Date 1/31/14
    prp.document.label.format pdf
    Size 4.5 MB
    Date 1/31/17
    prp.document.label.format pdf
    Size 1.1 MB
    Date 1/31/17
    prp.document.label.format pdf
    Size 970.7 KB
    Date 1/31/14
    prp.document.label.format pdf
    Size 6.7 MB
    Date 6/1/12
    prp.document.label.format pdf
    Size 4.7 MB
    Date 1/31/17
    prp.document.label.format pdf
    Size 1.1 MB
    Date 1/31/17
    prp.document.label.format pdf
    Size 975.4 KB
    Date 1/31/14
    Certificate
    Format
    Size
    Date
    Add to My Documents
    prp.document.label.format pdf
    Size 787.2 KB
    Date 12/12/19
    prp.document.label.format pdf
    Size 930 KB
    Date 6/17/19
    prp.document.label.format pdf
    Size 972.6 KB
    Date 5/28/19
    prp.document.label.format pdf
    Size 5.8 MB
    Date 3/19/19
    prp.document.label.format pdf
    Size 42.2 KB
    Date 5/9/18
    prp.document.label.format pdf
    Size 219.2 KB
    Date 11/1/16
    prp.document.label.format pdf
    Size 384.6 KB
    Date 11/6/15