Main range of productAltivar Process ATV600 product or component typeVariable speed drive product specific applicationProcess and utilities device short nameATV630 variantStandard version product destinationAsynchronous motorsSynchronous motors mounting modeWall mount EMC filterWithout EMC filter IP degree of protectionIP21 conforming to IEC 61800-5-1IP21 conforming to IEC 60529 degree of protectionUL type 1 conforming to UL 508C type of coolingForced convection supply frequency50...60 Hz - 5...5 % network number of phases3 phases [Us] rated supply voltage200...240 V - 15...10 % motor power kW5.5 kW (normal duty)4 kW (heavy duty) motor power hp7.5 hp normal duty5 hp heavy duty line current20.2 A at 200 V (normal duty)17.1 A at 240 V (normal duty)15.1 A at 200 V (heavy duty)13 A at 240 V (heavy duty) prospective line Isc50 kA apparent power7.1 kVA at 240 V (normal duty)5.4 kVA at 240 V (heavy duty) continuous output current25.4 A at 4 kHz for normal duty18.7 A at 4 kHz for heavy duty maximum transient current27.9 A during 60 s (normal duty)28.1 A during 60 s (heavy duty) asynchronous motor control profileOptimized torque modeConstant torque standardVariable torque standard synchronous motor control profilePermanent magnet motorSynchronous reluctance motor output frequency0.0001…0.5 kHz speed drive output frequency0.1…599 Hz nominal switching frequency4 kHz switching frequency2...12 kHz adjustable4...12 kHz with derating factor safety functionSTO (safe torque off) SIL 3 discrete input logic16 preset speeds communication port protocolModbus serialModbus TCPEthernet option cardSlot A: communication module, Profibus DP V1Slot A: communication module, ProfinetSlot A: communication module, DeviceNetSlot A: communication module, Modbus TCP/EtherNet/IPSlot A: communication module, CANopen daisy chain RJ45Slot A: communication module, CANopen SUB-D 9Slot A: communication module, CANopen screw terminalsSlot A/slot B: digital and analog I/O extension moduleSlot A/slot B: output relay extension moduleSlot A: communication module, Ethernet IP/Modbus TCP/MD-LinkCommunication module, BACnet MS/TPCommunication module, Ethernet Powerlink Complementary output voltage<= power supply voltage permissible temporary current boost1.1 x In during 60 s (normal duty)1.5 x In during 60 s (heavy duty) motor slip compensationCan be suppressedNot available in permanent magnet motor lawAdjustableAutomatic whatever the load acceleration and deceleration rampsLinear adjustable separately from 0.01...9999 s braking to standstillBy DC injection protection typeThermal protection: motorSafe torque off: motorMotor phase break: motorThermal protection: driveSafe torque off: driveOverheating: driveOvercurrent between output phases and earth: driveOverload of output voltage: driveShort-circuit protection: driveMotor phase break: driveOvervoltages on the DC bus: driveLine supply overvoltage: driveLine supply undervoltage: driveLine supply phase loss: driveOverspeed: driveBreak on the control circuit: drive frequency resolutionDisplay unit: 0.1 HzAnalog input: 0.012/50 Hz electrical connectionControl: removable screw terminals0.5...1.5 mm²/AWG 20...AWG 16Motor: screw terminal10 mm²/AWG 8Line side: screw terminal6 mm²/AWG 10 connector typeRJ45 (on the remote graphic terminal) for Ethernet/Modbus TCPRJ45 (on the remote graphic terminal) for Modbus serial physical interface2-wire RS 485 for Modbus serial transmission frameRTU for Modbus serial transmission rate10/100 Mbit/s for Ethernet IP/Modbus TCP4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial exchange modeHalf duplex, full duplex, autonegotiation Ethernet/Modbus TCP data format8 bits, configurable odd, even or no parity for Modbus serial type of polarizationNo impedance for Modbus serial number of addresses1…247 for Modbus serial method of accessSlave Modbus TCP supplyExternal supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protectionInternal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protectionInternal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection local signalling3 LEDslocal diagnostic: 3 LEDs (dual colour)embedded communication status: 4 LEDs (dual colour)communication module status: 1 LED (red)presence of voltage: width171 mm height409 mm depth233 mm net weight7.7 kg analogue input number3 analogue input typeAI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bitsAI1, AI2, AI3 software-configurable current: 0...20 mA/4...20 mA, impedance: 250 Ohm, resolution 12 bits discrete input number8 discrete input typeDI1...DI6 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhmDI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm input compatibilityDI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2 discrete input logicPositive logic (source) (DI1...DI6), < 5 V (state 0), > 11 V (state 1)Negative logic (sink) (DI1...DI6), > 16 V (state 0), < 10 V (state 1)Positive logic (source) (DI5, DI6), < 0.6 V (state 0), > 2.5 V (state 1)Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1) analogue output number2 analogue output typeSoftware-configurable voltage AO1, AO2: 0...10 V DC impedance 470 Ohm, resolution 10 bitsSoftware-configurable current AO1, AO2: 0...20 mA, resolution 10 bits sampling duration2 ms +/- 0.5 ms (DI1...DI4) - discrete input5 ms +/- 1 ms (DI5, DI6) - discrete input5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input10 ms +/- 1 ms (AO1) - analog output accuracy+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output linearity errorAI1, AI2, AI3: +/- 0.15 % of maximum value for analog inputAO1, AO2: +/- 0.2 % for analog output relay output number3 relay output typeConfigurable relay logic R1: fault relay NO/NC electrical durability 100000 cyclesConfigurable relay logic R2: sequence relay NO electrical durability 100000 cyclesConfigurable relay logic R3: sequence relay NO electrical durability 100000 cycles refresh timeRelay output (R1, R2, R3): 5 ms (+/- 0.5 ms) minimum switching currentRelay output R1, R2, R3: 5 mA at 24 V DC maximum switching currentRelay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V ACRelay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DCRelay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V ACRelay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC isolationBetween power and control terminals Variable speed drive application selectionBuilding - HVAC Compressor centrifugalFood and beverage processing Other applicationMining mineral and metal FanMining mineral and metal PumpOil and gas FanWater and waste water Other applicationBuilding - HVAC Screw compressorFood and beverage processing PumpFood and beverage processing FanFood and beverage processing AtomizationOil and gas Electro submersible pump (ESP)Oil and gas Water injection pumpOil and gas Jet fuel pumpOil and gas Compressor for refineryWater and waste water Centrifuge pumpWater and waste water Positive displacement pumpWater and waste water Electro submersible pump (ESP)Water and waste water Screw pumpWater and waste water Lobe compressorWater and waste water Screw compressorWater and waste water Compressor centrifugalWater and waste water FanWater and waste water ConveyorWater and waste water Mixer Motor power range AC-34…6 kW at 200…240 V 3 phases Environment insulation resistance> 1 MOhm 500 V DC for 1 minute to earth noise level56 dB conforming to 86/188/EEC power dissipation in WNatural convection: 47 W at 200 V, switching frequency 4 kHzForced convection: 179 W at 200 V, switching frequency 4 kHz volume of cooling air103 m3/h operating positionVertical +/- 10 degree maximum THDI<48 % from 80...100 % of load conforming to IEC 61000-3-12 electromagnetic compatibilityElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-41.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 pollution degree2 conforming to EN/IEC 61800-5-1 vibration resistance1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-61 gn (f= 13…200 Hz) conforming to IEC 60068-2-6 shock resistance15 gn for 11 ms conforming to IEC 60068-2-27 relative humidity5…95 % without condensation conforming to IEC 60068-2-3 ambient air temperature for operation-15…50 °C (without)50…60 °C (with derating factor) ambient air temperature for storage-40…70 °C operating altitude<= 1000 m without1000...4800 m with current derating 1 % per 100 m environmental characteristicChemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3 standardsUL 508C EN/IEC 61800-3Environment 1 category C2 EN/IEC 61800-3Environment 2 category C3 EN/IEC 61800-3 EN/IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 product certificationsULATEX zone 2/22CSADNV-GLREACHTÜVATEX INERIS markingCE Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
CatalogueFormatSizeAdd to My DocumentsUser guideFormatSizeAdd to My DocumentsSize pdfSize 970.6 KBDate 8/1/19DescriptionATV630, ATV650, ATV660, ATV680Altivar Process ModularSize xlsxSize 258.6 KBDate 5/16/19Descriptionfieldbus addresses to use with each Fieldbus manualsSize pdfSize 193.4 KBDate 3/1/19DescriptionShort-Circuit Current Ratings (SCCR) and Branch Circuit ProtectionAltivar ProcessSize pdfSize 1.8 MBDate 11/30/17DescriptionGetting Started with Altivar Process ATV600 ATV630/ATV650Size pdfSize 2.4 MBDate 10/31/17DescriptionVW3A3720 = For ATV600 firmware V1.5 and upper VW3A3721 = For ATV600 firmware V1.6 and upperSize pdfSize 1.5 MBDate 4/28/17DescriptionATV630, 650, 660 & 680, ATV930, 950, 960 & 980 Altivar Process ModularCertificateFormatSizeAdd to My DocumentsInstruction sheetFormatSizeAdd to My DocumentsSize pdfSize 9.2 MBDate 9/25/18DescriptionATV600, ATV900 : Frame sizes 1 to 5 ATV340 : Frame sizes 4 & 5Size pdfSize 2.1 MBDate 2/1/19DescriptionVW3A9510, VW3A9511, VW3A9512, VW3A9513, VW3A9514, VW3A9515Application solutionsFormatSizeAdd to My DocumentsSize pdfSize 2 MBDate 1/12/17DescriptionApplication Note: How to configure a Multi-Drives Booster Control OptimizedSize pdfSize 2 MBDate 1/12/17DescriptionApplication Note: how to configure a Multi-Drives Standard Level ControlSize pdfSize 2.2 MBDate 1/12/17Descriptionhow to configure a Multi Masters Booster Control with Service Continuity. Booster Control is used to maintain a constant pressure at the outlet by varying the speed of the pumps. Altivar Process ATV600 drives allow these pumps to have an optimized consumption of the power and at the same time provide optimized monitoring features.China RoHS declarationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsMarine certificateFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My DocumentsSize pdfSize 1.1 MBDate 5/30/16DescriptionThis table is made according to SJ/T 11364. O: indicates that the concentration of hazardous substance in all of the homogeneous materials for this part is below the limit as stipulated in GB/T 26572. X: indicates that concentration of hazardous substance in at least one of the homogeneous materials used for this part is above the limit as stipulated in GB/T 26572
- All Languages79
Software and FirmwareLanguage
Software - ReleasedFormatSizeAdd to My DocumentsSize zipSize 4.8 MBDate 10/1/19DTM filesFormatSizeAdd to My DocumentsSize zipSize 85.2 MBDate 5/16/19Files in documentDescriptionThe DTM libraries are installed individually, independently of the FDT container.The DTMs can be used in Schneider Electric environments:- SoMove- Unity (Device-dependant)- SoMachine (Device-dependant) For other Languages, you can download a dedicated EXE file on https://www.se.com/ww/en/product-range/2714-somoveALWAYS INSTALL FIRST THE ENGLISH EXESize exeSize 111.7 MBDate 5/22/19DescriptionCompatibility with ATV6xx DTM LibraryLanguage pack is version specific; that is the language pack created for version N of Altivar Process ATV6xx DTM library cannot be used with N-1 or N+1 version of the ATV6xx DTM library. Pre-RequisitesBefore installing a language pack:· Close the FDT container.· Install the ATV6xx DTM library (in English).Size exeSize 112.8 MBDate 5/22/19DescriptionCompatibilité avec le DTM ATV6xx Library:Les packs de Langues sont liés au DTM Library en Anglais. Il faut utiliser la même version entre ce package Français et le DTM Library. Prérequis:Avant dinstaller ce pack langue "Français":1) Fermer le FDT (SoMove, ou autre FDT)2) Installer le DTM ATV9xx_DTM_Library_EN (in English).https://www.se.com/ww/en/download/document/ATV9xx_DTM_Library_EN/3) Installer ce pack de langue en FrançaisSize exeSize 112.2 MBDate 5/22/19DescriptionCompatibility with ATV6xx DTM LibraryLanguage pack is version specific; that is the language pack created for version N of Altivar Process ATV6xx DTM library cannot be used with N-1 or N+1 version of the ATV6xx DTM library. Pre-RequisitesBefore installing a language pack:· Close the FDT container.· Install the ATV6xx DTM library (in English).Size exeSize 112 MBDate 5/22/19DescriptionCompatibility with ATV6xx DTM LibraryLanguage pack is version specific; that is the language pack created for version N of Altivar Process ATV6xx DTM library cannot be used with N-1 or N+1 version of the ATV6xx DTM library. Pre-RequisitesBefore installing a language pack:· Close the FDT container.· Install the ATV6xx DTM library (in English).Size exeSize 112.2 MBDate 5/22/19DescriptionEDS filesFormatSizeAdd to My Documents
- All Languages23
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensionsDrives with IP21 Top Cover
Front and Left ViewsDrives Without IP21 Top Cover
Left and Rear Views
Mounting and ClearanceClearances
≥ 100 mm (3.94 in.)
≥ 100 mm (3.94 in.)
≥ 10 mm (0.39 in.)Mounting TypesMounting Type A: Individual IP21a ≥100 mm (3.94 in.)Mounting Type B: Side by Side IP20Mounting Type C: Individual IP20a ≥0
Connections and SchemaThree-Phase Power Supply with Upstream Breaking via Line Contactor
Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping category 0 in accordance with standard IEC/EN 60204-1(1)Line choke if used(2)Use relay R1 set to operating state Fault to switch Off the product once an error is detected.A1 :DriveKM1 :Line ContactorQ2, Q3 :Circuit breakersS1, S2 :PushbuttonsT1 :Transformer for control partThree-Phase Power Supply with Downstream Breaking via Contactor
Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping category 0 in accordance with standard IEC/EN 60204-1(1)Line choke if used(2)Use relay R1 set to operating state Fault to switch Off the product once an error is detected.A1 :DriveKM1 :ContactorControl Block Wiring Diagram(1)Safe Torque Off(2)Analog Output(3)Digital Input(4)Reference potentiometer(5)Analog InputR1A, R1B, R1C :Fault relayR2A, R2C :Sequence relayR3A, R3C :Sequence relaySensor Connection
It is possible to connect either 1 or 3 sensors on terminals AI2 or AI3.Sink / Source Switch Configuration
The switch is used to adapt the operation of the logic inputs to the technology of the programmable controller outputs.
Switch Set to SRC (Source) Position Using the Output Power Supply for the Digital InputsSwitch Set to SRC (Source) Position and Use of an External Power Supply for the DIsSwitch Set to SK (Sink) Position Using the Output Power Supply for the Digital InputsSwitch Set to EXT Position Using an External Power Supply for the DIs
Set the switch to Source (factory setting) if using PLC outputs with PNP transistors.
Set the switch to Ext if using PLC outputs with NPN transistors.
Performance CurvesDerating Curves40 °C (104 °F) - Mounting type A, B and C50 °C (122 °F) - Mounting type A, B and C60 °C (140 °F) - Mounting type B and CIn :Nominal Drive CurrentSF :Switching Frequency