Main range compatibilityLexium 32i product or component typeServo motor with power stage device short nameBMI Complementary maximum mechanical speed8000 rpm [Us] rated supply voltage115...230 V - 15...10 % supply voltage limits100…240 V network number of phasesSingle phase supply frequency50/60 Hz - 5...5 % network frequency limits47.5…63 Hz EMC filterIntegrated continuous output current3.5 A at 8 kHz output current 3s peak10.5 A at 230 V for 3 s continuous stall current3.5 A continuous stall torque3.4 N.m at 115...230 V single phase peak stall torque8.6 N.m at 115 V single phase8.6 N.m at 230 V single phase nominal output power700 W at 230 V single phase400 W at 115 V single phase nominal torque2.9 N.m at 115 V single phase2.2 N.m at 230 V single phase nominal speed3200 rpm at 230 V single phase1400 rpm at 115 V single phase maximum current Irms17.8 A at 115 V, single phase17.8 A at 230 V, single phase product compatibilityDrive control unit LXM32i CANopenDrive control unit LXM32i EtherCAT shaft endUntapped second shaftWithout second shaft end shaft diameter14 mm shaft length30 mm feedback typeAbsolute single turn SinCos Hiperface speed feedback resolution32768 points/turn holding brakeWith holding torque3 N.m holding brake mounting supportInternational standard flange motor flange size70 mm electrical connectionPrinted circuit board connector torque constant0.81 N.m/A at 20 °C back emf constant54.44 V/krpm at 20 °C number of motor poles10 rotor inertia1.78 kg.cm² stator resistance2.58 Ohm at 20 °C stator inductance2.28 mH at 20 °C stator electrical time constant0.88 ms at 20 °C maximum radial force Fr730 N at 1000 rpm580 N at 2000 rpm510 N at 3000 rpm460 N at 4000 rpm430 N at 5000 rpm400 N at 6000 rpm maximum axial force Fa0.2 x Fr brake pull-in power5 W type of coolingNatural convection length339 mm number of motor stacks3 centring collar diameter60 mm centring collar depth2.5 mm number of mounting holes4 mounting holes diameter5.5 mm circle diameter of the mounting holes75…82 mm distance shaft shoulder-flange2.5 mm Environment IP degree of protectionIP65 Packing Units Unit Type of Package 1PCE Number of Units in Package 11 Package 1 Weight6.5 kg Package 1 Height25 cm Package 1 width18.6 cm Package 1 Length55 cm Offer Sustainability Sustainable offer statusGreen Premium product EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsUser guideFormatSizeAdd to My Documentsprp.document.label.format pdfSize 11.1 MBDate 3/1/20DescriptionThis manual describes technical characteristics, installation, commissioning, operation and maintenanceof the integrated servo drive system Lexium 32i CAN + BMi.prp.document.label.format pdfSize 11.8 MBDate 3/1/20DescriptionThis manual describes technical characteristics, installation, commissioning, operation and maintenanceof the integrated servo drive system Lexium 32i ECT + BMi.prp.document.label.format pdfSize 10.1 MBDate 3/1/20DescriptionThis manual describes technical characteristics, installation, commissioning, operation and maintenanceof the integrated servo drive system Lexium 32i ETH + BMi.CertificateFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages29
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.