Main range of productZelio Control product or component typeModular measurement and control relays relay typeCurrent control relay relay nameRM35JA relay monitored parametersOvercurrent or undercurrent in window modeOvercurrent or undercurrent detection time delayAdjustable 1...20 s, 0 + 10 % on energisation TiAdjustable 0.3...30 s, 0 + 10 % on crossing the threshold Tt switching capacity in VA1250 VA minimum switching current10 mA at 5 V DC maximum switching current5 A AC maximum power consumption in VA3.5 VA AC measurement range10...100 mA E2-M terminals2...20 mA E1-M terminals2...500 mA current50...500 mA E3-M terminals utilisation categoryAC-12 conforming to IEC 60947-5-1AC-13 conforming to IEC 60947-5-1AC-14 conforming to IEC 60947-5-1AC-15 conforming to IEC 60947-5-1DC-12 conforming to IEC 60947-5-1DC-13 conforming to IEC 60947-5-1DC-14 conforming to IEC 60947-5-1 Complementary reset time1500 ms time delay maximum switching voltage250 V AC [Us] rated supply voltage24...240 V AC/DC 50/60 Hz +/- 10 % supply voltage limits20.4…264 V AC/DC operating voltage tolerance- 15 % + 10 % Un maximum power consumption in W0.6 W DC control circuit frequency40...70 Hz +/- 10 % resistance across terminals1 Ohm at E2-M terminals5 Ohm at E1-M terminals0.2 Ohm at E3-M terminals output contacts2 C/O nominal output current5 A maximum measuring cycle30 ms measurement cycle as true rms value hysteresis5…50 % of threshold setting delay at power up0.3 s measurement accuracy+/- 10 % of the full scale value repeat accuracy+/- 0.5 % for input and measurement circuit+/- 2 % for time delay measurement error0.05 %/°C with temperature variation1 by volt over the whole range with voltage variation polarityNo DC threshold setting10...100 % markingCE : EMC 89/336/EECCE : 73/23/EEC overvoltage categoryIII conforming to IEC 60664-1 insulation resistance> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1 [Ui] rated insulation voltage250 V conforming to IEC 60664-1 operating positionAny position without connections - terminalsScrew terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable endScrew terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable endScrew terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable endScrew terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end tightening torque0.6…1 N.m conforming to IEC 60947-1 housing materialSelf-extinguishing plastic local signallingLED (green)power ON: LED (yellow)relay ON: mounting support35 mm symmetrical DIN rail conforming to EN/IEC 60715 electrical durability100000 cycles mechanical durability30000000 cycles operating rate<= 360 operations/hour full load safety reliability dataMTTFd = 296.8 yearsB10d = 270000 contacts materialCadmium free width35 mm net weight0.13 kg Environment immunity to microbreaks50 ms electromagnetic compatibilityEmission standard for industrial environments conforming to EN/IEC 61000-6-4Emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3Immunity for industrial environments conforming to NF EN/IEC 61000-6-2 standardsEN/IEC 60255-6 product certificationsGLCSAGOSTULC-Tick ambient air temperature for storage-40…70 °C ambient air temperature for operation-20…50 °C relative humidity95 % at 55 °C conforming to IEC 60068-2-30 vibration resistance0.35 mm (f= 5…57.6 Hz) conforming to IEC 60068-2-61 gn (f= 57.6…150 Hz) conforming to IEC 60255-21-1 shock resistance15 gn for 11 ms conforming to IEC 60255-21-1 IP degree of protectionIP20 (terminals) conforming to IEC 60529IP30 (casing) conforming to IEC 60529 pollution degree3 conforming to IEC 60664-1 dielectric test voltage2 kV, 1 min AC 50 Hz conforming to IEC 60255-52 kV, 1 min AC 50 Hz conforming to IEC 60664-1 non-dissipating shock wave4 kV conforming to IEC 60255-54 kV conforming to IEC 60664-14 kV conforming to IEC 61000-4-5 Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsCertificateFormatSizeAdd to My DocumentsSize zipSize 949 KBDate 5/19/15Instruction sheetFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My DocumentsREACh DeclarationFormatSizeAdd to My Documents
- All Languages18
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsCurrent Control RelaysDimensions and Mounting
Connections and SchemaCurrent Control RelaysWiring DiagramApplication SchemesExample: Detection of Jamming on a Crusher (Overcurrent Function)
Current measured ≤ 15 A
Current measured > 15 A
Technical DescriptionFunction DiagramsUndercurrent Detection
Without memory ("No Memory" mode)
With memory ("Memory" mode)Overcurrent Detection
Without memory ("No Memory" mode)
With memory ("Memory" mode)Legend
Ti Starting inhibition time delay
Tt Time delay after crossing of threshold
Un Supply voltage
I Monitored current
I> Overcurrent threshold
I< Undercurrent threshold
11-12/11-14, 21-22/21-24 Output relay connections
Relay status: black color = energized.
NOTE: In "Memory" mode, the relay opens when crossing of the threshold is detected and then stays in that position. The power supply voltage must be switched off to reset the product.