Main range of productHarmony XB5 bezel materialDark grey plastic product or component typeAnnunciator mounting diameter22 mm head typeStandard cap/operator or lens colourBlack Complementary [Us] rated supply voltage120 V +/- 10 % supply circuit typeAC/DC supply frequency50/60 Hz current consumption<= 20 mA signalling typeContinuous or intermittent tone resistance to high pressure washer9000000 Pa at 82 °C, distance : 0.1 m height29 mm width29 mm depth55 mm net weight0.024 kg Environment noise level90 dB at 4 kHz distance 0.1 m (+/- 10 %) protective treatmentTH ambient air temperature for storage-40…70 °C ambient air temperature for operation-40…70 °C overvoltage categoryClass II conforming to IEC 60536 electrical shock protection classClass II conforming to IEC 60536 IP degree of protectionIP66 conforming to IEC 60529IP67IP69IP69K NEMA degree of protectionNEMA 13NEMA 4X IK degree of protectionIK03 conforming to EN 50102IK03 conforming to IEC 50102 standardsEN 60947-1IEC 60947-5-1UL 508EN 60947-5-4IEC 60947-1CSA C22.2 No 14JIS C8201-5-1IEC 60947-5-4EN 60947-5-1JIS C8201-1 product certificationsRINADNVCSABVGLLROS (Lloyds register of shipping)UL listed Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity ProfileNo need of specific recycling operations WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsCADFormatSizeAdd to My DocumentsCertificateFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My DocumentsREACh DeclarationFormatSizeAdd to My Documents
- All Languages15
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensionse:Clamping thickness: 1 to 6 mm / 0.04 to 0.24 in.
Mounting and ClearancePanel Cut-out for BuzzerConnection by Screw Clamp Terminals
(1) Diameter on finished panel or support
(2) Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)
a in mm
a in in.
b in mm
b in in.
By screw clamp terminals or plug-in connector
Connections and SchemaCabling of Annunciators(1)Supply(2)Intermittent(3)Continuous