View all OsiSense XM
pressure switch XMLD 300 bar - 2 stages fixed scale - 2 C/OShow more characteristics
Discontinued on 30 December 2017
End-of-service on 30 December 2017
XMLD300E1S12 has not been replaced. Please contact your customer care center for more information.
The maximum number of products that can be compared is 4. Remove already added products.
Main range of productOsiSense XM product or component typeElectromechanical pressure sensor pressure sensor typeElectromechanical pressure sensor device short nameXMLD pressure sensor size300 bar controlled fluidFresh water (0…160 °C) fluid connection typeG 1/4 (female) conforming to ISO 228 electrical connectionScrew-clamps terminals, 1 x 0.5...2 x 2.5 mm² AWG gaugeAWG 20...AWG 14 cable entryCable gland 7…13 mm contacts type and composition2 C/O snap action, silver contacts2 C/O staggered, silver contacts product specific applicationDual stage pressure switch type of operationDetection of 2 single thresholds electrical circuit typeControl circuit scale typeFixed differential local displayWithout maximum permissible accidental pressure675 bar destruction pressure1350 bar pressure actuatorPiston materials in contact with fluidFPM, FKMPTFEBrass316L stainless steel enclosure materialZinc alloy [In] rated current3 A, B300, AC-15 (Ue = 120 V) conforming to EN/IEC 60947-5-11.5 A, B300, AC-15 (Ue = 240 V) conforming to EN/IEC 60947-5-10.1 A, R300, DC-13 (Ue = 250 V) conforming to EN/IEC 60947-5-1 Complementary spread between 2 stages11…189 bar natural differential at low setting17 bar natural differential at high setting42 bar maximum permissible pressure - per cycle375 bar terminal block type8 terminals maximum operating rate60 cyc/mn repeat accuracy2 % [Ui] rated insulation voltage300 V conforming to UL 508500 V conforming to EN/IEC 60947-1300 V conforming to CSA C22.2 No 14 [Uimp] rated impulse withstand voltageEN/IEC 60947-1 6 kV maximum resistance across terminals25 mOhm conforming to IEC 255-7 category 325 mOhm conforming to NF C 93-050 method A short-circuit protection10 A cartridge fuse, type gG (gl) mechanical durability3000000 cycles settingExternal height113 mm depth85 mm width46 mm net weight0.75 kg Environment standardsEN/IEC 60947-5-1UL 508CSA C22.2 No 14CE product certificationsEACULCSA protective treatmentTC standard version ambient air temperature for operation-25…70 °C ambient air temperature for storage-40…70 °C operating positionAny position vibration resistance4 gn conforming to IEC 60068-2-6 (f = 30…500 Hz) shock resistance50 gn conforming to IEC 60068-2-27 electrical shock protection classClass I conforming to IEC 1140Class I conforming to IEC 536Class I conforming to NF C 20-030 IP degree of protectionIP66 conforming to EN/IEC 60529 Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsInstruction sheetFormatSizeAdd to My Documents
- All Languages5
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)1 fluid entry, tapped G1/4 (BSP female)(2)1 electrical connections entry, tapped M20 x 1.5Ø :2 elongated holes Ø 5.2 x 6.7
Connections and SchemaWiring DiagramTerminal Model(a)Contact 1(b)Contact 2
Performance CurvesOperating CurvesHigh Setting Tripping Points of Contacts 1 and 2(y)PH2 setting (rising pressure)(x)PH1 setting (rising pressure)1 :Maximum differential2 :Minimum differentialNatural Differential of Contacts 1 and 2(y)Rising pressure(x)Falling pressureEF :Contact 1GH :Contact 2(y)Pressure(x)Time(1)Adjustable value(2)Non adjustable valuePH :High pointPB :Below point