View all OsiSense XM
pressure switch XMLD 350 mbar - 2 stages fixed scale - 2 C/OShow more characteristics
Discontinued on 30 December 2017
End-of-service on 30 December 2017
has not been replaced. Please contact your customer care center for more information.
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main range of productOsiSense XM product or component typeElectromechanical pressure sensor pressure sensor typeElectromechanical pressure sensor device short nameXMLD pressure sensor size0.35 bar controlled fluidAir (0…160 °C)Hydraulic oil (0…160 °C) fluid connection typeG 1/4 (female) conforming to ISO 228 electrical connectionScrew-clamps terminals, 1 x 0.5...2 x 2.5 mm² AWG gaugeAWG 20...AWG 14 cable entryCable gland 9…13 mm contacts type and composition2 C/O snap action, silver contacts2 C/O staggered, silver contacts product specific applicationDual stage pressure switch type of operationDetection of 2 single thresholds electrical circuit typeControl circuit scale typeFixed differential local displayWithout maximum permissible accidental pressure2.25 bar destruction pressure4.5 bar pressure actuatorDiaphragm materials in contact with fluidFPM, FKM304L stainless steelSteel enclosure materialZinc alloy [In] rated current3 A, B300, AC-15 (Ue = 120 V) conforming to EN/IEC 60947-5-11.5 A, B300, AC-15 (Ue = 240 V) conforming to EN/IEC 60947-5-10.1 A, R300, DC-13 (Ue = 250 V) conforming to EN/IEC 60947-5-1 Complementary spread between 2 stages0.025…0.31 bar natural differential at low setting0.03 bar natural differential at high setting0.03 bar maximum permissible pressure - per cycle1.25 bar terminal block type8 terminals maximum operating rate120 cyc/mn repeat accuracy2 % [Ui] rated insulation voltage300 V conforming to UL 508500 V conforming to EN/IEC 60947-1300 V conforming to CSA C22.2 No 14 [Uimp] rated impulse withstand voltage6 kV EN/IEC 60947-1 maximum resistance across terminals25 mOhm conforming to IEC 255-7 category 325 mOhm conforming to NF C 93-050 method A short-circuit protection10 A cartridge fuse, type gG (gl) mechanical durability4000000 cycles settingExternal height162 mm depth110 mm width110 mm net weight2.575 kg Environment standardsUL 508CSA C22.2 No 14EN/IEC 60947-5-1CE product certificationsULCSAEAC protective treatmentTC standard version ambient air temperature for operation-25…70 °C ambient air temperature for storage-40…70 °C operating positionAny position vibration resistance2 gn conforming to IEC 60068-2-6 (f = 30…500 Hz) shock resistance30 gn conforming to IEC 60068-2-27 electrical shock protection classClass I conforming to IEC 1140Class I conforming to IEC 536Class I conforming to NF C 20-030 IP degree of protectionIP66 conforming to EN/IEC 60529 Contractual warranty Warranty18 months
- All Languages2
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensionsØ a =110 mm / 4.33 in.(1)1 fluid entry, tapped G1/4 (BSP female)(2)1 electrical connections entry, tapped Pg 13.5
Connections and SchemaWiring DiagramTerminal Model(a)Contact 1(b)Contact 2
Performance CurvesOperating CurvesHigh Setting Tripping Points of Contacts 1 and 2(y)PH2 setting (falling pressure)(x)PH1 setting (falling pressure)1 :Maximum differential2 :Minimum differentialNatural Differential of Contacts 1 and 2(y)Falling pressure(x)Rising pressureEF :Contact 1GH :Contact 2(y)Pressure(x)Time(1)Adjustable value(2)Non adjustable valuePH :High pointPB :Below point