Main range of productOsiSense XS series nameGeneral purpose sensor typeInductive proximity sensor device application- sensor nameXS1 sensor designCylindrical M5 size29 mm body typeFixed detector flush mounting acceptanceFlush mountable materialStainless steel type of output signalDiscrete wiring technique3-wire [Sn] nominal sensing distance0.8 mm discrete output function1 NO output circuit typeDC discrete output typePNP electrical connectionCable cable length5 m [Us] rated supply voltage5...24 V DC switching capacity in mA<= 100 mA with overload and short-circuit protection IP degree of protectionIP67 conforming to IEC 60529 Complementary thread typeM5 x 0.5 detection faceFrontal front materialPPS enclosure materialStainless steel 303 operating zone0…0.6 mm cable composition3 x 0.11 mm² wire insulation materialPvR status LEDOutput state: 1 LED (yellow) supply voltage limits5…30 V DC switching frequency<= 5000 Hz maximum voltage drop<2 V (closed) current consumption<= 10 mA no-load maximum delay first up5 ms maximum delay response1 ms maximum delay recovery1 ms markingCE threaded length29 mm height5 mm length29 mm net weight0.15 kg Environment product certificationsULCSA ambient air temperature for operation-25…70 °C ambient air temperature for storage-40…85 °C vibration resistance25 gn amplitude = +/- 2 mm (f = 10…55 Hz) conforming to IEC 60068-2-6 shock resistance50 gn for 11 ms conforming to IEC 60068-2-27 Packing Units Unit Type of Package 1PCE Number of Units in Package 11 Package 1 Weight150 g Package 1 Height13.3 cm Package 1 width4.5 cm Package 1 Length8.2 cm Offer Sustainability Sustainable offer statusGreen Premium product EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information Environmental Disclosure Circularity Profile Contractual warranty Warranty18 months
CertificateFormatSizeAdd to My DocumentsInstruction sheetFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My Documents
- All Languages8
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Mounting and ClearanceMinimum Mounting Distances in mm
Side by sidee (1) ≥2 mm/0.79 in.
Face to facee (2) ≥12 mm/0.47 in.
Facing a metal objecte (3) ≥3 mm/0.12 in.
Mounted in a metal supportd ≥5 mm/0.17 in.h ≥0 mm/0 in.
Tightening torque : 2.2 N.m. (values obtained with washers mounted)Mounting(1)Bending cable: 4 x external cable diameter
Connections and SchemaWiring Schemes
PNPBU :BlueBN :BrownBK :Black
Performance CurvesPerformance CurvesStandard Steel Target (mm) : 5x5x1Pick-up pointsDrop-out points (object approaching from the side)(y)Sensing distance in mm